Notch← Back to the plan
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
Vintage Inspired Pine Dresser
This vintage-inspired dresser is small enough in size to be a side table or entryway console.
- Difficulty
- Intermediate
- Time
- 5–9.8 hours
- Cost
- $$$
Cut list
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Front Legs | 2 | 1" × 1" × 21" | — | ☐ |
| Back Legs | 2 | 1" × 1" × 26" | — | ☐ |
| Front top and bottom spans | 2 | 3/4" × 2" × 29" | — | ☐ |
| Front two mid spans | 2 | 3/4" × 1" × 29" | — | ☐ |
| Front vertical middle | 1 | 3/4" × 1" × 4" | — | ☐ |
| Top Drawer Faces (use 1x6" boards) | 2 | 3/4" × 5" × 14 3/4" | — | ☐ |
| Mid & Bottom Drawer Face (use 1x6" boards) | 2 | 3/4" × 5 1/2" × 30" | — | ☐ |
| Back Spans | 2 | 3" × 3" × 29" | — | ☐ |
| Vertical Back | 1 | 3" × 3" × 14" | — | ☐ |
| Large Drawer Sides | 4 | 3" × 3" × 15" | — | ☐ |
| Large Drawer Sides | 4 | 3" × 3" × 15" | — | ☐ |
| Small Drawer Box Front and Back | 4 | 3" × 3" × 11" | — | ☐ |
| Large Drawer Box Front and Back | 4 | 3" × 3" × 26" | — | ☐ |
Materials
| Item | Qty | ✓ |
|---|---|---|
| Board, 2x2 96" | 1 board | ☐ |
| Board, 1x3 96" | 1 board | ☐ |
| Board, 1x2 96" | 1 board | ☐ |
| Board, 1x6 96" | 1 board | ☐ |
| Plywood, 3/4" Thick Full Sheet | 1 board | ☐ |
| Laminated Pine Board, 3/4" Thick 20" x 96" | 1 board | ☐ |
| Plywood, 1/4" Thick Half Sheet | 1 board | ☐ |
| Pine, 5" Bun/Turned Legs | 2 board | ☐ |
| 1.25" Kreg Pocket Hole Screws | 92 each | ☐ |
| 2.5" Kreg Pocket Hole Screws | 4 each | ☐ |
| Wood Glue | 1 each | ☐ |
| Stain | 1 each | ☐ |
| Flat Varnish / Satin Polyeurethane | 1 each | ☐ |
| Pairs of 14" bottom mount drawer slides | 4 each | ☐ |
| Drawer knobs | 6 each | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.