Vanity Table with Shelf Hutch — board plan

What to buy, and which parts come off which board.

Buy 6 boards at 8 ft.

3/4" × 11 1/4" — 1x12, 10 ft

2 boards · 7.5 board feet (includes 15% for knots and defects) · 59% of the boards you buy used

Board 1 · 12 1/2" left over
53"29 1/4"
1. Tabletop — 53"
2. Legs — 29 1/4"
Board 2 · 65 5/8" left over
29 1/4"
1. Legs — 29 1/4"

3/4" × 7 1/4" — 1x8, 8 ft

2 boards · 6.9 board feet (includes 15% for knots and defects) · 85% of the boards you buy used

Board 1 · 1/8" left over
53"20 3/4"20 3/4"
1. Hutch top — 53"
2. Hutch sides and dividers — 20 3/4"
3. Hutch sides and dividers — 20 3/4"
Board 2 · 29 1/2" left over
20 3/4"20 3/4"11 3/4"11 3/4"
1. Hutch sides and dividers — 20 3/4"
2. Hutch sides and dividers — 20 3/4"
3. Hutch shelves — 11 3/4"
4. Hutch shelves — 11 3/4"

3/4" × 3 1/2" — 1x4, 10 ft

2 boards · 2.1 board feet (includes 15% for knots and defects) · 54% of the boards you buy used

Board 1 · 44 3/8" left over
50 1/2"
1. Aprons — 50 1/2"
Board 2 · 44 3/8" left over
50 1/2"
1. Aprons — 50 1/2"

Cuts are listed longest-first, which is how they should be made: the awkward pieces get placed while there is still board to place them on. The layout assumes one end of each board is squared off (1") and that every cut costs 1/8" of kerf — the reason six 16″ parts do not fit on a 96″ board.

3/4" × 11 1/4" — 1x12, 10 ft

Board 1 · 12 1/2" left over

Board 2 · 65 5/8" left over

3/4" × 7 1/4" — 1x8, 8 ft

Board 1 · 1/8" left over

Board 2 · 29 1/2" left over

3/4" × 3 1/2" — 1x4, 10 ft

Board 1 · 44 3/8" left over

Board 2 · 44 3/8" left over