Skip to content
Notch

← Back to the plan

Furniture

Upholstered Bench with Faux Metal Frame

Step-by-step build — 3 steps. Also available as a print sheet.

  1. 1Build the top & bottom of the frame

    • Cut the 2x2 pieces as shown on the cut list.
    • Drill pocket holes on the 8-1/2" pieces, where the blue arrows point.
    • Then assemble the pieces as shown, using 2-1/2" pocket screws. You will end up with two identical pieces that will make the top and bottom of the frame.
    Upholstered Bench with Faux Metal Frame — step photo 1

  2. 2Put the top and bottom together

    Drill pocket holes on the 14" inch vertical pieces and use them to put the two pieces together using 2-1/2" pocket screws. Make sure the pocket holes face the inside of the frame.

    Upholstered Bench with Faux Metal Frame — step photo 2

  3. 3Attach the Seat

    At this point I sanded and painted the frame. I used a metallic silver spray paint to give the wood the appearance of metal. I also upholstered the seat. Once the paint is dry and upholstery completed, I attached the frame to the seat using 2" wood screws as shown by the arrows. Tip: Visit the link under the "Extras" tab for more details, including video instructions for upholstering the seat. Enjoy your bench!

    Upholstered Bench with Faux Metal Frame — step photo 3