Under Workbench Storage

Check out the video first, and as you build. It'll help with a few instructions!

Cut down plywood parts according to the cutlist provided above

Grab all of your 3/4" thick plywood brace pieces to construct the case and drill pocket holes into them

Using 1 1/4 pocket hole screws, assemble the case together

In all of the 1/2" thick plywood drawer pieces, (excluding the false fronts) cut a 1/2" wide and 1/4" deep dado to house the drawer bottoms

Assemble all 4 drawer boxes using 1" long pocket hole screws

Using a small spacer, install 4 sets of drawer slides inside the case

Install large drawers between the drawer slides, attach the drawer front, and attach the drawer pull

Install small drawers between the drawer slides, attach the drawer front, and attach the drawer pull

Congrats on building the under workbench storage!