Tryed Side Table

Drill 1-1/2" pocket holes along one long edge of two of the 2x6 boards, then attach all four 2x6 center pieces together with 2-1/2" pocket hole screws and glue.

Measure and cut the 2x4 breadboard ends, then attach them to the joined 2x6 center panel with 2-1/2" pocket hole screws.

Cut the four aprons to length and drill 1-1/2" pocket holes into each end.

Attach the aprons to the legs with 2-1/2" pocket hole screws, making sure the pocket holes meant for attaching the top are oriented upward.

Attach the base to the underside of the tabletop through the apron pocket holes with 2-1/2" pocket hole screws. Sand and finish with stain and topcoat.