NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
Two 2x6 legs lapped together at a shallow peak — the whole design is one interlocking joint, cut freehand with a circular saw and cleaned up with a chisel.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Legs One end cut at 45°, the other end cut at 22-1/2° off square, long point to long point measurement. | 2 | 1 1/2" × 5 1/2" × 104 5/8" | 2x6 | ☐ |
| Base feet | 4 | 1 1/2" × 5 1/2" × 24" | 2x6 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 2x6, 10 ft (or 2x4 for a lighter, cheaper build) The two legs — cut list is unchanged if substituting 2x4. | 2 each | ☐ |
| 2x6, 8 ft (or 2x4) Cut into the four base feet. | 1 each | ☐ |
| Self-tapping star bit screws, 1-1/4" Fastens the lap joint permanently. | 10 each | ☐ |
| Self-tapping star bit screws, 2-1/2" Attaches the base feet. | 10 each | ☐ |
| Bolts, 1-1/2", with washers and nuts Optional — use instead of screws at the lap joint if the arch needs to knock down for repeat use. | 2 each | ☐ |
| Tent anchors and heavy fishing line Recommended for anchoring outdoors, especially with fabric or garland draped over the arch. | 1 each | ☐ |
| Wood stain or paint | 1 qt | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.