Notch← Back to the plan
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
Toy Storage Console with Rolling Bins
Organize the piles of toys in this toy storage console.
- Difficulty
- Intermediate
- Time
- 7.3–14.5 hours
- Cost
- $$$
Cut list
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Front legs | 2 | 1" × 1" × 25" | — | ☐ |
| Back legs | 2 | 1" × 1" × 32" | — | ☐ |
| Center legs | 2 | 1" × 1" × 20" | — | ☐ |
| Leg braces | 6 | 1" × 1" × 12" | — | ☐ |
| Side frame top | 2 | 1" × 1" × 7" | — | ☐ |
| Side frame angle | 2 | 1" × 1" × 10" | — | ☐ |
| Front/back frame | 4 | 1" × 1" × 48" | — | ☐ |
| Front panel | 1 | 3/4" × 2" × 48" | — | ☐ |
| Console top | 1 | 3/4" × 9" × 52" | — | ☐ |
| Back panel | 1 | 1/2" × 9" × 48" | — | ☐ |
| Bottom panel | 1 | 1/2" × 12" × 48" | — | ☐ |
| Side panels | 2 | 1/2" × 9" × 12" | — | ☐ |
| Center panels | 2 | 1/2" × 10" × 12" | — | ☐ |
| Bin supports | 8 | 1" × 1" × 15" | — | ☐ |
| Bin side slats | 16 | 3/4" × 3" × 14" | — | ☐ |
| Bin front/back slats | 16 | 3/4" × 3" × 22" | — | ☐ |
| Bin bottoms | 2 | 1/2" × 14" × 20" | — | ☐ |
Materials
| Item | Qty | ✓ |
|---|---|---|
| Board, 2x2 96" | 7 board | ☐ |
| Board, 1x3 48" | 1 board | ☐ |
| Board, 1x4 96" | 7 board | ☐ |
| Board, 1x10 72" | 1 board | ☐ |
| Plywood, 1/2" Thick Half Sheet | 1 board | ☐ |
| 2 1/2" pocket hole screws | 75 each | ☐ |
| 1 1/4" pocket hole screws | 50 each | ☐ |
| Castors | 8 each | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.