Skip to content
Notch
← Back to the plan

Toddler Workbench — board plan

What to buy, and which parts come off which board.

Buy 6 boards at 8 ft.

3/4" × 3"

3 boards · 4.7 board feet (includes 15% for knots and defects) · 92% of each board consumed

  1. Board 1 · 6 5/8" left over

    1. Back Legs — 32"
    2. Back Legs — 32"
    3. Horizontal Beams — 24"

  2. Board 2 · 4 1/2" left over

    1. Horizontal Beams — 24"
    2. Horizontal Beams — 24"
    3. Horizontal Beams — 24"
    4. Front Legs — 18"

  3. Board 3 · 12 1/4" left over

    1. Horizontal Beams — 24"
    2. Front Legs — 18"
    3. Side Beams — 10"
    4. Side Beams — 10"
    5. Side Beams — 10"
    6. Side Beams — 10"

1/2" × 11"

1 board · 2.5 board feet (includes 15% for knots and defects) · 61% of each board consumed

  1. Board 1 · 37 3/4" left over

    1. Top — 32"
    2. Pegboard — 25"

1/2" × 10"

1 board · 1.2 board feet (includes 15% for knots and defects) · 31% of each board consumed

  1. Board 1 · 65 7/8" left over

    1. Bottom Plywood — 29"

1/2" × 9"

1 board · 2.4 board feet (includes 15% for knots and defects) · 73% of each board consumed

  1. Board 1 · 26 3/8" left over

    1. Back Plywood — 24"
    2. Front Doors — 12"
    3. Front Doors — 12"
    4. Side Plywood — 10"
    5. Side Plywood — 10"

Cuts are listed longest-first, which is how they should be made: the awkward pieces get placed while there is still board to place them on. The layout assumes one end of each board is squared off (1") and that every cut costs 1/8" of kerf — the reason six 16″ parts do not fit on a 96″ board.