Tiny House Loft Bedroom System — board plan

3 1/2" × 3 1/2" — 4x4, 6 ft

2 boards · 12.0 board feet (includes 15% for knots and defects) · 65% of the boards you buy used

1. Board 1 · 23 7/8" left over

   71"
   1. Wall post, tall — 71"

2. Board 2 · 42 7/8" left over

   52"
   1. Wall post, short — 52"

1 1/2" × 7 1/4" — 2x8, 8 ft

5 boards · 27.3 board feet (includes 15% for knots and defects) · 67% of the boards you buy used

1. Board 1 · 14 7/8" left over

   80"
   1. Bed front rail — 80"

2. Board 2 · 36 3/8" left over

   58 1/2"
   1. Bed joists — 58 1/2"

3. Board 3 · 36 3/8" left over

   58 1/2"
   1. Bed joists — 58 1/2"

4. Board 4 · 36 3/8" left over

   58 1/2"
   1. Bed joists — 58 1/2"

5. Board 5 · 36 3/8" left over

   58 1/2"
   1. Bed joists — 58 1/2"

1 1/2" × 5 1/2" — 2x6 tongue and groove, for loft floor/ceiling

0 boards · 6.3 board feet (includes 15% for knots and defects) · 0% of the boards you buy used

• Loft floor decking at 96" — Longer than a 96″ board once the end trim is taken off.

1 1/2" × 3 1/2" — 2x4, 8 ft

14 boards · 46.6 board feet (includes 15% for knots and defects) · 84% of the boards you buy used

1. Board 1 · 3/8" left over

   94 1/2"
   1. Wall cleat, room length — 94 1/2"

2. Board 2 · 4 3/4" left over

   82"8"
   1. Loft floor joists — 82"
   2. Ladder support — 8"

3. Board 3 · 12 7/8" left over

   82"
   1. Loft floor joists — 82"

4. Board 4 · 12 7/8" left over

   82"
   1. Loft floor joists — 82"

5. Board 5 · 12 7/8" left over

   82"

3/4" × 52 3/4" — 3/4" plywood, full sheet (drawer/door faces)

1 board · 4.0 board feet (includes 15% for knots and defects) · 14% of the boards you buy used

1. Board 1 · 82 1/8" left over

   12 3/4"
   1. Hidden storage door — 12 3/4"

3/4" × 16 1/4" — 3/4" plywood, full sheet (drawer/door faces)

1 board · 7.1 board feet (includes 15% for knots and defects) · 78% of the boards you buy used

1. Board 1 · 21 3/8" left over

   24 3/4"24 1/4"24 1/4"
   1. Door panel, third — 24 3/4"
   2. Door panels — 24 1/4"
   3. Door panels — 24 1/4"

3/4" × 7" — 3/4" plywood, full sheet (drawer/door faces)

1 board · 3.1 board feet (includes 15% for knots and defects) · 78% of the boards you buy used

1. Board 1 · 21 3/8" left over

   24 3/4"24 1/4"24 1/4"
   1. Drawer face, third drawer — 24 3/4"
   2. Drawer faces — 24 1/4"
   3. Drawer faces — 24 1/4"

3/4" × 5 1/2" — 1x6, 8 ft

3 boards · 9.1 board feet (includes 15% for knots and defects) · 98% of the boards you buy used

1. Board 1 · 0" left over

   24"24"24"22 1/2"
   1. Drawer sides — 24"
   2. Drawer sides — 24"
   3. Drawer sides — 24"
   4. Drawer front/back, third drawer — 22 1/2"

2. Board 2 · 0" left over

   24"24"24"22 1/2"
   1. Drawer sides — 24"
   2. Drawer sides — 24"
   3. Drawer sides — 24"
   4. Drawer front/back, third drawer — 22 1/2"

3. Board 3 · 6 1/2" left over

3/4" × 3 1/2" — 2x6 tongue and groove, for loft floor/ceiling

8 boards · 13.4 board feet (includes 15% for knots and defects) · 85% of the boards you buy used

1. Board 1 · 14 7/8" left over

   80"
   1. Bed slats — 80"

2. Board 2 · 14 7/8" left over

   80"
   1. Bed slats — 80"

3. Board 3 · 14 7/8" left over

   80"
   1. Bed slats — 80"

4. Board 4 · 14 7/8" left over

   80"
   1. Bed slats — 80"

5. Board 5 · 14 7/8" left over

   80"
   1. Bed slats — 80"

6. Board 6 · 14 7/8" left over

1/4" × 45 3/4" — Beadboard, paneling, or 1x6 T&G, full sheet (wall back)

1 board · 5.5 board feet (includes 15% for knots and defects) · 64% of the boards you buy used

1. Board 1 · 34 7/8" left over

   60"
   1. Wall backing panel — 60"

1/4" × 24" — 1/4" plywood, full sheet (drawer bottoms, shoe storage backs)

1 board · 3.4 board feet (includes 15% for knots and defects) · 75% of the boards you buy used

1. Board 1 · 23 5/8" left over

   24"23 1/2"23 1/2"
   1. Drawer bottom, third drawer — 24"
   2. Drawer bottoms — 23 1/2"
   3. Drawer bottoms — 23 1/2"