NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A rolling, single-room tiny-house dollhouse scaled for fashion dolls, with angled walls, cutout windows, and a fold-out convertible couch.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Bottom Front angled tongue cut with circular saw or jigsaw. | 1 | 3/4" × 11 1/4" × 46" | Pine, 1x12 | ☐ |
| Outer walls, tall Short-point measurement, one end cut at 15° off square. | 2 | 3/4" × 11 1/4" × 16" | Pine, 1x12 | ☐ |
| Outer walls, short Short-point measurement, one end cut at 15° off square. | 2 | 3/4" × 5 1/2" × 16" | Pine, 1x6 | ☐ |
| Inner wall | 1 | 3/4" × 5 1/2" × 9 1/4" | Pine, 1x6 | ☐ |
| Loft support Confirm the couch-width decision (step 9) before cutting this to final length. | 1 | 3/4" × 5 1/2" × 11 1/4" | Pine, 1x6 | ☐ |
| Back panel | 1 | 1/4" × 36" × 16 3/4" | Plywood | ☐ |
| Side panel | 1 | 1/4" × 38" × 13 1/2" | Plywood | ☐ |
| Wheel supports Or two 1x12 pieces at 2-1/2". | 2 | 3/4" × 2 1/2" × 11" | Scrap 1x3 | ☐ |
| Wheels Or store-bought wheels/wood rounds — size adjustable. | 4 | 1/2" × 4" × 4" | Plywood, 1/2" | ☐ |
| Couch/bed top Use 12" instead of 11-1/4" if you chose the wider living-room option in step 9. | 1 | 3/4" × 1 1/2" × 11 1/4" | Scrap 1x2 | ☐ |
| Couch/bed seat | 1 | 3/4" × 3 1/2" × 11 1/4" | Scrap 1x4 | ☐ |
| Couch/bed base | 1 | 1 1/2" × 3 1/2" × 11 1/4" | Scrap 2x4 | ☐ |
| Couch/bed legs | 4 | 3/4" × 3/4" × 3/4" | Pine, 1x1 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Plywood, 1/4", 48" x 48" | 1 each | ☐ |
| Pine, 1x1, 3 ft Back deck railing — hot glue is the practical way to join these small pieces. | 1 each | ☐ |
| Pine, 1x12, 8 ft | 1 each | ☐ |
| Pine, 1x6, 6 ft | 1 each | ☐ |
| Scrap 1x2, 1x3, 1x4, and 2x4 Convertible couch/bed and trim. | 1 each | ☐ |
| Wheels, 4" diameter 1/2" plywood rounds work, or store-bought wheels. | 4 each | ☐ |
| Small hinge Convertible couch/bed mechanism. | 1 each | ☐ |
| Self-tapping wood screws, 2" | 1 box | ☐ |
| Pocket hole screws, 1-1/4" | 1 box | ☐ |
| Brad nails, 3/4" | 1 box | ☐ |
| Wood glue | 3 oz | ☐ |
| Hot glue For the small back-deck railing pieces. | 1 each | ☐ |
| Bolts and washers Mounts the wheels to their supports. | 4 set | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.