Notch← Back to the plan
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
Tile Topped End Table
Tile topped end table.
- Difficulty
- Intermediate
- Time
- 3.3–6 hours
- Cost
- $$$
Cut list
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Leg blanks | 4 | 1" × 1" × 25" | — | ☐ |
| Table skirts | 4 | 3/4" × 2" × 8" | — | ☐ |
| Top framing sides | 4 | 1/4" × 7/8" × 12" | — | ☐ |
| Top | 1 | 1/2" × 12" × 12" | — | ☐ |
Materials
| Item | Qty | ✓ |
|---|---|---|
| Board, 1x8 72" | 1 board | ☐ |
| Plywood, 1/2" Thick 12 1/8" X 12 1/8" | 1 board | ☐ |
| Kreg 1 1/4" fine thread pocket screws | 16 each | ☐ |
| Kreg 1" coarse thread pocket screws | 4 each | ☐ |
| 12' X 12" Tile | 1 each | ☐ |
| 5/8" pin nails | 12 each | ☐ |
| Titebond 1 wood glue | 1 each | ☐ |
| 100, 150 & 220 grit sandpaper | 3 each | ☐ |
| Minwax Weathered Red Oak Stain | 1 each | ☐ |
| Minwax Tung Oil Finish | 1 each | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.