Tapered-Leg Kid's Chair — board plan

What to buy, and which parts come off which board.

Buy 3 boards at 8 ft.

1 1/2" × 1 1/2" — Pine

1 board · 1.6 board feet (includes 15% for knots and defects) · 95% of the boards you buy used

Board 1 · 4 1/2" left over
20"20"9 1/4"9 1/4"8"8"7 1/2"7 1/2"
1. Back legs — 20"
2. Back legs — 20"
3. Front legs — 9 1/4"
4. Front legs — 9 1/4"
5. Front/back apron — 8"
6. Front/back apron — 8"
7. Side aprons — 7 1/2"
8. Side aprons — 7 1/2"

3/4" × 11" — Plywood or MDF

1 board · 0.8 board feet (includes 15% for knots and defects) · 14% of the boards you buy used

Board 1 · 82 7/8" left over
12"
1. Seat top — 12"

3/4" × 2 1/2" — Pine

1 board · 0.2 board feet (includes 15% for knots and defects) · 18% of the boards you buy used

Board 1 · 78 3/4" left over
8"8"
1. Back support rails — 8"
2. Back support rails — 8"

Cuts are listed longest-first, which is how they should be made: the awkward pieces get placed while there is still board to place them on. The layout assumes one end of each board is squared off (1") and that every cut costs 1/8" of kerf — the reason six 16″ parts do not fit on a 96″ board.

1 1/2" × 1 1/2" — Pine

Board 1 · 4 1/2" left over

3/4" × 11" — Plywood or MDF

Board 1 · 82 7/8" left over

3/4" × 2 1/2" — Pine

Board 1 · 78 3/4" left over