NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A wall-anchored, floor-to-ceiling-scale queen headboard with a plywood center panel framed in moulding.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Legs | 2 | 1 1/2" × 3 1/2" × 72 1/2" | Pine or fir | ☐ |
| Top header | 1 | 1 1/2" × 3 1/2" × 56" | Pine or fir | ☐ |
| Front panel trim | 2 | 1 1/2" × 3 1/2" × 56" | Pine or fir | ☐ |
| Center panel trim Measure and cut to fit — 1x4 width varies board to board. | 1 | 3/4" × 3 1/2" × 41" | Pine | ☐ |
| Center panel | 1 | 3/4" × 48" × 56" | Plywood | ☐ |
| Top cap | 1 | 1 1/2" × 3 1/2" × 67" | Pine or fir | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Pine or fir, 2x4, 8 ft (or stud length) | 5 each | ☐ |
| Pine, 1x4, 10 ft | 1 each | ☐ |
| Pine, 1x4, 4 ft | 1 each | ☐ |
| Plywood, 3/4", 4x8 sheet Center panel — full sheet keeps this piece from warping the way a solid glued-up slab would at this height. | 1 each | ☐ |
| Baseboard moulding, 5-1/4" Buy extra beyond the finished measurement — mitered corners waste real length. | 24 ft | ☐ |
| Header moulding | 6 ft | ☐ |
| Lag screws Anchors the top rail to wall studs — not optional at this height. | 4 each | ☐ |
| Pocket hole screws, 1-1/4" and 1-1/2" | 1 box | ☐ |
| Finish nails | 1 box | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.