Tall Corner Media Console — board plan

What to buy, and which parts come off which board.

Buy 15 boards at 8 ft.

3/4" × 15 3/4" — Plywood

4 boards · 22.0 board feet (includes 15% for knots and defects) · 62% of the boards you buy used

Board 1 · 5 1/2" left over
48"20"10 1/2"10 1/2"
1. Shelves — 48"
2. Center shelf — 20"
3. Dividers — 10 1/2"
4. Dividers — 10 1/2"
Board 2 · 46 7/8" left over
48"
1. Shelves — 48"
Board 3 · 46 7/8" left over
48"
1. Shelves — 48"
Board 4 · 46 7/8" left over
48"
1. Shelves — 48"

3/4" × 5 1/2" — Pine

1 board · 3.1 board feet (includes 15% for knots and defects) · 100% of the boards you buy used

Board 1 · 1/4" left over
47 1/4"47 1/4"
1. Sides — 47 1/4"
2. Sides — 47 1/4"

3/4" × 3 1/2" — Pine

3 boards · 4.9 board feet (includes 15% for knots and defects) · 82% of the boards you buy used

Board 1 · 3/4" left over
50 1/2"43 1/2"
1. Top trim, sides — 50 1/2"
2. Top trim, back-left — 43 1/2"
Board 2 · 7 3/4" left over
50 1/2"36 1/2"
1. Top trim, sides — 50 1/2"
2. Top trim, front — 36 1/2"
Board 3 · 44 3/8" left over
50 1/2"
1. Top trim, back-right — 50 1/2"

3/4" × 1 1/2" — Pine

5 boards · 3.8 board feet (includes 15% for knots and defects) · 89% of the boards you buy used

Board 1 · 1/4" left over
47 1/4"47 1/4"
1. Back supports — 47 1/4"
2. Back supports — 47 1/4"
Board 2 · 1/4" left over
47 1/4"47 1/4"
1. Back supports — 47 1/4"
2. Back supports — 47 1/4"
Board 3 · 1/4" left over
47 1/4"47 1/4"
1. Side face frame — 47 1/4"
2. Side face frame — 47 1/4"
Board 4 · 1 3/4" left over

1/4" × 24 1/2" — Plywood

1 board · 2.3 board feet (includes 15% for knots and defects) · 50% of the boards you buy used

Board 1 · 47 5/8" left over
47 1/4"
1. Back panel, center — 47 1/4"

1/4" × 13" — Plywood

1 board · 2.5 board feet (includes 15% for knots and defects) · 100% of the boards you buy used

Board 1 · 1/4" left over
47 1/4"47 1/4"
1. Back panel, sides — 47 1/4"
2. Back panel, sides — 47 1/4"

Cuts are listed longest-first, which is how they should be made: the awkward pieces get placed while there is still board to place them on. The layout assumes one end of each board is squared off (1") and that every cut costs 1/8" of kerf — the reason six 16″ parts do not fit on a 96″ board.

3/4" × 15 3/4" — Plywood

Board 1 · 5 1/2" left over

Board 2 · 46 7/8" left over

Board 3 · 46 7/8" left over

Board 4 · 46 7/8" left over

3/4" × 5 1/2" — Pine

Board 1 · 1/4" left over

3/4" × 3 1/2" — Pine

Board 1 · 3/4" left over

Board 2 · 7 3/4" left over

Board 3 · 44 3/8" left over

3/4" × 1 1/2" — Pine

Board 1 · 1/4" left over

Board 2 · 1/4" left over

Board 3 · 1/4" left over

Board 4 · 1 3/4" left over

1/4" × 24 1/2" — Plywood

Board 1 · 47 5/8" left over

1/4" × 13" — Plywood

Board 1 · 1/4" left over

Board 5 · 48 3/8" left over