NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A full storage bed: plywood headboard/footboard panels and two 12-drawer storage bases flanking the mattress — real casework, real drawer slides, no wasted space under the bed.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Headboard/footboard panels | 2 | 3/4" × 26 3/4" × 36" | 3/4" plywood | ☐ |
| Panel top trim | 2 | 3/4" × 2 1/2" × 36" | Pine 1x3 | ☐ |
| Panel bottom trim | 2 | 3/4" × 1 1/2" × 36" | Pine 1x2 | ☐ |
| Headboard legs | 2 | 1 1/2" × 2 1/2" × 49 1/4" | Pine 2x3 | ☐ |
| Footboard legs Same panel as the headboard, just shorter legs. | 2 | 1 1/2" × 2 1/2" × 30 1/4" | Pine 2x3 | ☐ |
| Moulding, long Optional. Long point to long point, both ends mitered 45°, not parallel. | 4 | 3/4" × 1 1/2" × 30" | — | ☐ |
| Moulding, short Optional. Mitered to match. | 4 | 3/4" × 1 1/2" × 16 3/4" | — | ☐ |
| Storage base sides | 4 | 3/4" × 15 3/4" × 75" | 3/4" plywood strip | ☐ |
| Storage base ends/dividers | 8 | 3/4" × 15 3/4" × 14 7/8" | 3/4" plywood strip | ☐ |
| Storage base backs | 2 | 1/4" × 16 1/4" × 75" | 1/4" plywood | ☐ |
| Storage base frame rails | 4 | 1 1/2" × 3 1/2" × 70" | Pine 2x4 | ☐ |
| Storage base frame ends | 4 | 1 1/2" × 3 1/2" × 10" | Pine 2x4 | ☐ |
| Mattress cleats | 2 | 1 1/2" × 1 1/2" × 75" | Pine 2x2 | ☐ |
| Drawer support blocks | 14 | 3/4" × 2 1/2" × 7" | Pine 1x3 scrap | ☐ |
| Drawer box sides | 24 | 3/4" × 3 1/2" × 14" | Pine 1x4 | ☐ |
| Drawer box fronts/backs | 12 | 3/4" × 3 1/2" × 21 1/2" | Pine 1x4 | ☐ |
| Drawer faces | 12 | 3/4" × 7 1/4" × 23 3/4" | Pine 1x8 | ☐ |
| Drawer bottoms | 12 | 1/4" × 14" × 23" | 1/4" plywood | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 3/4" plywood, 4x8 sheet Headboard and footboard panels. | 1 each | ☐ |
| 3/4" plywood, 4x8 sheet — ripped into strips Ripped into ~15-3/4"-wide strips for the two storage-base sides and dividers. | 2 each | ☐ |
| 1/4" plywood or backerboard, 4x8 sheet Storage-base backs — also what squares the boxes up. | 2 each | ☐ |
| Pine, 1x3, 8 ft Two for headboard/footboard trim, two for mattress slats. | 4 each | ☐ |
| Pine, 2x3, 8 ft Headboard and footboard legs. | 2 each | ☐ |
| Pine, 1x2, 8 ft | 1 each | ☐ |
| Decorative moulding, 8 ft Optional front detail on the headboard/footboard. | 2 each | ☐ |
| Pine, 2x4, 8 ft Storage-base frames. | 4 each | ☐ |
| Pine, 2x2, 8 ft Storage-base rails and mattress cleats. | 2 each | ☐ |
| Pine, 1x4, 8 ft Drawer box sides. | 7 each | ☐ |
| Pine, 1x8, 6 ft Drawer faces. | 4 each | ☐ |
| Drawer knobs or handles | 12 each | ☐ |
| 14" bottom-mount drawer slides, pair | 12 pair | ☐ |
| Pocket hole screws, assorted | 1 box | ☐ |
| Brad nails, assorted |
| 1 box |
| ☐ |
| Wood glue | 8 oz | ☐ |
Overall cost: $$$$. Lumber varies by region, species, and season, so we give a band rather than a figure.