Skip to content
Gifts & Small Projects

Stockings Holder

With Christmas around the corner, it’s about time to start decorating.

No reviews yet

Difficulty
Easy
Time
3–5.5 hours
Cost
$

About this build

With Christmas around the corner, it’s about time to start decorating. One of the most quintessential Christmas decorations is hanging your stockings on the mantel. Today we’re bringing you the plans on how to build a stockings holder to securely keep your stockings on the mantel!

Tools

Essential

  • Drill / Driver
  • Miter Saw
  • Pocket Hole Jig
  • Random Orbit Sander
  • Router
  • Table Saw

Materials

ItemQty
Board, 1x6 72"1 board
1 1/4" Kreg Pocket Screws12 each
Stain1 each

Overall cost: $. Lumber prices vary by region, species, and season, so we give a band rather than a figure we would only be pretending to know.

Cut list

PartQtyT × W × L
Mantel Base13/4" × 5" × 40"
Hook Piece 133/4" × 2" × 6"
Hook Piece 233/4" × 1" × 3"
Hook Piece 333/4" × 1" × 1"

What to buy

Buy 3 boards at 8 ft.

3/4" × 5"

1 board

3/4" × 2"

1 board

3/4" × 1"

1 board

Assumes 8 ft stock, a 1/8" saw kerf, and buying each part at its own width. Change the board size or kerf on the full board plan →

Start building →

Instructions

  1. 1Make All Cuts

    Make all the cuts according to the cut list.

    Stockings Holder — step photo 5
  2. 2Add Pocket Holes to Mantel Base

    Add two pocket holes on the Mantel Base in three locations: 20" (center of board) and 8" in from either side.

    Stockings Holder — step photo 6
  3. 3Add Pocket Holes to Hook Piece 2

    Add a single pocket hole going in both directions of Hook Piece 2.

    Stockings Holder — step photo 7
  4. 4Build Hooks

    Build the three hooks. Use the two pocket holes to attach Hook Piece 2 to the base of Hook Piece 1 and Hook Piece 3.

    Stockings Holder — step photo 8
  5. 5Attach Hooks

    Attach the hooks to the outside of the Mantel Base where you drilled the pocket holes.

    Stockings Holder — step photo 9
  6. 6Router the Edge

    Use a palm router around the edge of the Mantel Base, going over the top of the hooks. This will help make it look like one piece of wood.

    Stockings Holder — step photo 10
  7. 7Stain the Wood

    Choose a nice wood stain to match your decor.

    Stockings Holder — step photo 11
  8. 8Hang Your Stockings

    Santa is coming! Hang your stockings on this beautiful stockings holder and make sure to put out a plate of cookies and a cup of milk!

    Stockings Holder — step photo 12
  9. 9Visit www.CharlestonCrafted.com

    Check out www.CharlestonCrafted.com for more great holiday projects like these!

Tags

  • Holiday
  • Beginner

Reviews & builds

No reviews yet

Sign in to review this plan or share your build.

No reviews yet. Be the first to build this.