Standing Jewelry Holder — board plan

What to buy, and which parts come off which board.

Buy 4 boards at 8 ft.

3/4" × 2 1/2" — Pine 1x3

1 board · 0.7 board feet (includes 15% for knots and defects) · 48% of the boards you buy used

Board 1 · 49 3/4" left over
15"15"2 3/8"2 3/8"2 3/8"2 3/8"2 3/8"2 3/8"
1. Tray sides — 15"
2. Tray sides — 15"
3. Upright laminate strips — 2 3/8"
4. Upright laminate strips — 2 3/8"
5. Upright laminate strips — 2 3/8"
6. Upright laminate strips — 2 3/8"
7. Upright laminate strips — 2 3/8"
8. Upright laminate strips — 2 3/8"

3/4" × 3/4" — 3/4" square dowel

1 board · 0.3 board feet (includes 15% for knots and defects) · 65% of the boards you buy used

Board 1 · 33 1/2" left over
15"14 1/2"14 1/2"14 1/2"1/2"1/2"1/2"1/2"
1. Top rail — 15"
2. Uprights — 14 1/2"
3. Uprights — 14 1/2"
4. Uprights — 14 1/2"
5. Legs — 1/2"
6. Legs — 1/2"
7. Legs — 1/2"
8. Legs — 1/2"

1/4" × 7 1/2" — 1/4" plywood

1 board · 0.2 board feet (includes 15% for knots and defects) · 17% of the boards you buy used

Board 1 · 79 3/8" left over
15 1/2"
1. Base — 15 1/2"

1/4" × 1" — 1/4" plywood

1 board · 0.1 board feet (includes 15% for knots and defects) · 36% of the boards you buy used

Board 1 · 61 1/4" left over
5 1/2"5 1/2"5 1/2"5 1/2"5 1/2"5 1/2"
1. Small trim details — 5 1/2"
2. Small trim details — 5 1/2"
3. Small trim details — 5 1/2"
4. Small trim details — 5 1/2"
5. Small trim details — 5 1/2"
6. Small trim details — 5 1/2"

Cuts are listed longest-first, which is how they should be made: the awkward pieces get placed while there is still board to place them on. The layout assumes one end of each board is squared off (1") and that every cut costs 1/8" of kerf — the reason six 16″ parts do not fit on a 96″ board.

3/4" × 2 1/2" — Pine 1x3

Board 1 · 49 3/4" left over

3/4" × 3/4" — 3/4" square dowel

Board 1 · 33 1/2" left over

1/4" × 7 1/2" — 1/4" plywood

Board 1 · 79 3/8" left over

1/4" × 1" — 1/4" plywood

Board 1 · 61 1/4" left over