NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
Two mirrored 2x2 frames with mitered 1x8 tops that sit side by side with a deliberate gap down the middle — an industrial look built from nothing but construction lumber.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Short leg stretchers | 4 | 1 1/2" × 1 1/2" × 7 1/4" | Pine | ☐ |
| Legs | 8 | 1 1/2" × 1 1/2" × 17 1/4" | Pine | ☐ |
| Mid stretchers | 4 | 1 1/2" × 1 1/2" × 17" | Pine | ☐ |
| Long stretchers | 4 | 1 1/2" × 1 1/2" × 27 1/4" | Pine | ☐ |
| Angled corner braces Both ends cut at 45°, ends not parallel — long point to long point. | 2 | 1 1/2" × 1 1/2" × 26 1/8" | Pine | ☐ |
| Diagonal center brace Ripped from a 2x4 at a 45° bevel down the middle, then each half ripped again to 1-1/2" wide. | 1 | 1 1/2" × 1 1/2" × 17 1/4" | Pine | ☐ |
| Top boards, parallel-cut ends Both ends cut parallel at 45°, long-point-to-short-point measurement. | 2 | 3/4" × 7 1/4" × 28 1/4" | Pine | ☐ |
| Top boards, perpendicular-cut ends Both ends cut perpendicular at 45°, long point to long point. | 2 | 3/4" × 7 1/4" × 28 1/4" | Pine | ☐ |
| Top boards, narrow Both ends cut perpendicular at 45°; ripped narrower than full 1x8 width. | 2 | 3/4" × 7 1/4" × 13 3/4" | Pine | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Pine, 2x2, 8 ft | 4 each | ☐ |
| Pine, 1x8, 12 ft Mitered top boards for both frame halves. | 1 each | ☐ |
| Pine, 2x4 scrap For the diagonal center brace — ripped down. | 2 ft | ☐ |
| Pocket hole screws, 2-1/2" | 1 box | ☐ |
| Wood screws, 2" | 1 box | ☐ |
| Wood glue | 4 oz | ☐ |
| Sandpaper, assorted grit | 4 sheet | ☐ |
| Stain or finish | 1 quart | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.