Notch← Back to the plan
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
Small Printer Cart
This beautiful printer cart is small but has lots of organization.
- Difficulty
- Intermediate
- Time
- 6.5–12.8 hours
- Cost
- $$$
Cut list
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Side | 2 | 3/4" × 16" × 16" | — | ☐ |
| Center | 1 | 3/4" × 15" × 15" | — | ☐ |
| Bottom | 1 | 3/4" × 16" × 19" | — | ☐ |
| Top | 1 | 3/4" × 17" × 22" | — | ☐ |
| Shelf | 1 | 3/4" × 9" × 15" | — | ☐ |
| Drawer front | 2 | 3/4" × 4" × 9" | — | ☐ |
| Base front/back | 4 | 3/4" × 1" × 4" | — | ☐ |
| Base top/bottom | 4 | 3/4" × 1" × 14" | — | ☐ |
| Base center support | 2 | 3/4" × 1" × 18" | — | ☐ |
| Drawer box side | 4 | 1/2" × 3" × 14" | — | ☐ |
| Drawer box front/back | 4 | 1/2" × 3" × 7" | — | ☐ |
| Drawer box bottom | 2 | 1/4" × 7" × 13" | — | ☐ |
| Cabinet back | 1 | 1/4" × 15" × 20" | — | ☐ |
| Paper shelves | 9 | 1/4" × 9" × 14" | — | ☐ |
Materials
| Item | Qty | ✓ |
|---|---|---|
| Plywood, 3/4" Thick Half Sheet | 1 board | ☐ |
| Plywood, 1/2" Thick Quarter Sheet | 1 board | ☐ |
| Plywood, 1/4" Thick Quarter Sheet | 1 board | ☐ |
| Board, 1x2 96" | 2 board | ☐ |
| MDF, 1/4" Thick Half Sheet | 1 board | ☐ |
| 1 1/4" pocket hole screws | 50 each | ☐ |
| 1" pocket hole screws | 20 each | ☐ |
| 1 1/4" finish nails | 15 each | ☐ |
| Wood glue | 1 each | ☐ |
| 15 1/2" x 9 3/4" plexiglass sheet | 1 each | ☐ |
| 14" drawer slides | 2 each | ☐ |
| 1 1/4" wood screws | 4 each | ☐ |
| 5/8" brad nails | 20 each | ☐ |
| 5mm shelf pins | 40 each | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.