Simplest Wood Chaise Lounge

Build the main frame using 1-1/2" pocket holes and 2-1/2" pocket hole screws, or 2-3/4" countersunk screws. Notch out for the back support with a jigsaw.

Attach the seat slats to the main frame, attaching from underneath with pocket holes if desired.

Attach the first row of legs, then attach the second, taller row of legs to the front. Use 2-3/4" self-tapping screws and glue with multiple screws per joint for a solid connection.

Build the back frame the same way as the main frame.

Clamp the back frame in place against the main frame at the desired pivot point, then drill through both simultaneously so the holes align. Insert the bolts with nuts and washers.

Attach the back slats to the back frame with exterior screws or brad nails and glue.

Attach the stop block to the main frame at the position that stops the reclined back frame.

Sand all surfaces and apply primer and paint, or exterior stain.