NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A real, weatherproof outhouse with a framed 15° shed roof, metal roofing, and a board-and-batten door — stick-framed like a small shed, sized for an off-grid property.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Base rails | 2 | 1 1/2" × 3 1/2" × 72" | Treated 2x4 | ☐ |
| Base cross members | 3 | 1 1/2" × 3 1/2" × 33" | Treated 2x4 | ☐ |
| Floor decking | 7 | 1 1/2" × 5 1/2" × 36" | Treated 2x6 | ☐ |
| Bench front rail | 1 | 1 1/2" × 1 1/2" × 29" | 2x2 | ☐ |
| Bench supports | 2 | 1 1/2" × 3 1/2" × 24 1/2" | 2x4 | ☐ |
| Wall top plates Long point to short point, both ends cut parallel at 15°. | 2 | 1 1/2" × 3 1/2" × 48 1/8" | 2x4 | ☐ |
| Wall studs, front Longest point, one end at 15°. | 2 | 1 1/2" × 3 1/2" × 80 1/4" | 2x4 | ☐ |
| Wall studs, middle Longest point, one end at 15°. | 2 | 1 1/2" × 3 1/2" × 74 1/4" | 2x4 | ☐ |
| Wall studs, rear Longest point, one end at 15°. | 2 | 1 1/2" × 3 1/2" × 68 1/4" | 2x4 | ☐ |
| Wall bottom plates | 2 | 1 1/2" × 3 1/2" × 46 1/2" | 2x4 | ☐ |
| Wall sheathing 83-3/8" at the tall edge sloping to 70-1/2" — the 15° roof line, cut with a guide. | 2 | 1/2" × 48" × 83 3/8" | 1/2" exterior plywood | ☐ |
| Front/back tie-in, 2x6 | 1 | 1 1/2" × 5 1/2" × 36" | 2x6 | ☐ |
| Tie-in framing | 4 | 1 1/2" × 3 1/2" × 35" | 2x4 | ☐ |
| Roof supports | 2 | 1 1/2" × 3 1/2" × 28" | 2x4 | ☐ |
| Roof plywood | 1 | 1/2" × 36" × 52" | 1/2" exterior plywood | ☐ |
| Back panel, lower The scrap from the roof piece. | 1 | 1/2" × 36" × 44" | 1/2" exterior plywood | ☐ |
| Back panel, upper May need piecing from scraps — it's the back; nobody's judging. | 1 | 1/2" × 36" × 26 1/4" | 1/2" exterior plywood | ☐ |
| Door boards | 3 | 3/4" × 9 1/4" × 77" | 1x10 | ☐ |
| Door battens | 3 | 3/4" × 5 1/2" × 27 3/4" | 1x6 | ☐ |
| Door braces Both ends at 37-1/2° off square, ends parallel, long point to short point. | 2 | 3/4" × 3 1/2" × 38" | 1x4 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Exterior plywood, 1/2", 4x8 sheet Wall sheathing, roof, and back panels. | 3 each | ☐ |
| 2x4, 12 ft, pressure treated Base rails — ground contact rated. | 1 each | ☐ |
| 2x4, 10 ft, pressure treated Base cross members. | 1 each | ☐ |
| 2x6, 6 ft, pressure treated Floor decking — the front deck lives in the rain. | 4 each | ☐ |
| 2x2, 29", treated or weather resistant A railing spindle works — it comes treated in short lengths. | 1 each | ☐ |
| 2x4, 8 ft Wall framing and roof tie-ins. | 11 each | ☐ |
| 1x10, 8 ft Door boards. | 3 each | ☐ |
| 1x6, 8 ft Door battens. | 1 each | ☐ |
| 1x4, 8 ft Door diagonal braces. | 1 each | ☐ |
| Gate hinges Gate hardware, not interior door hinges — it's built for weather and sag. | 3 each | ☐ |
| Gate latch and handle Plus a string-through-a-hole so it opens from inside. Not optional. | 1 each | ☐ |
| Metal roofing, 36" wide x 54" | 1 each | ☐ |
| Roofing screws with washers, up to 2" Color-matched, gasketed — they seal their own holes. | 30 each | ☐ |
| Deck screws, 3", self-tapping |
| 100 each |
| ☐ |
| Galvanized nails, 8D Sheathing. Brads, staples, or screws also work — whatever your tools drive. | 200 each | ☐ |
| Exterior screws, 1-1/4" Door construction. | 50 each | ☐ |
Overall cost: $$$$. Lumber varies by region, species, and season, so we give a band rather than a figure.