NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A dining-height slatted outdoor chair, pocket-holed throughout — the same design scales up to a taller dining-table seat with one cut-length change.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Legs Cut at 24" instead for a dining-table-height seat. | 4 | 1 1/2" × 3 1/2" × 20 1/2" | 2x4 | ☐ |
| Arm rests | 2 | 1 1/2" × 3 1/2" × 27 3/4" | 2x4 | ☐ |
| Side supports | 2 | 1 1/2" × 3 1/2" × 24 3/4" | 2x4 | ☐ |
| Front/back aprons | 2 | 1 1/2" × 3 1/2" × 20 1/2" | 2x4 | ☐ |
| Seat supports | 3 | 1 1/2" × 1 1/2" × 20 1/2" | 2x2 | ☐ |
| Back slats | 5 | 3/4" × 3 1/2" × 25 1/2" | 1x4 | ☐ |
| Seat slats | 5 | 3/4" × 3 1/2" × 20" | 1x4 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 2x4, 10 ft | 2 each | ☐ |
| 1x4, 10 ft | 2 each | ☐ |
| 2x2, 8 ft (not in original shopping list — needed for the seat supports) | 1 each | ☐ |
| Exterior pocket hole screws, 2-1/2" | 36 each | ☐ |
| Exterior self-tapping star bit screws, 1-1/2" or longer | 40 each | ☐ |
| Exterior stain or paint | 1 qt | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.