NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A tall counter/bar-height table with clean built-up 2x2 legs and a project-panel top. Straightforward apron-and-leg build, pocket holes or screws.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Tabletop panel | 1 | 3/4" × 24" × 48" | pine panel | ☐ |
| End aprons | 2 | 3/4" × 3 1/2" × 24" | 1x4 | ☐ |
| Side aprons | 2 | 3/4" × 3 1/2" × 49 1/2" | 1x4 | ☐ |
| Leg ends | 4 | 1 1/2" × 1 1/2" × 22 1/2" | 2x2 | ☐ |
| Leg sides | 4 | 1 1/2" × 1 1/2" × 42" | 2x2 | ☐ |
| Bottom support | 1 | 1 1/2" × 1 1/2" × 49 1/2" | 2x2 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Edge-glued pine panel or plywood/MDF, 24 in x 48 in Top — panel for stain, MDF for paint. | 1 each | ☐ |
| 2x2, 8 ft Legs and bottom support. | 4 each | ☐ |
| 1x4, 10 ft Aprons. | 1 each | ☐ |
| Wood screws, 2 in and 2-1/2 in Or 1-1/4" and 2" pocket screws. | 1 box | ☐ |
| Wood glue | 1 bottle | ☐ |
| Finish or paint | 1 quart | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.