Notch← Back to the plan
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
Simple End Table with Drawers
This simple 4 drawer end table is the perfect size for adding a little extra storage next to your desk, couch, or even your bed.
- Difficulty
- Intermediate
- Time
- 4.5–8.8 hours
- Cost
- $$$
Cut list
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Table Legs (2x2) | 4 | 1" × 1" × 29" | — | ☐ |
| Side Panels (3/4" plywood) | 2 | 3/4" × 16" × 27" | — | ☐ |
| Back Panel (3/4" plywood) | 1 | 3/4" × 16" × 27" | — | ☐ |
| Top/Bottom Front Frame (2x2) | 2 | 1" × 1" × 16" | — | ☐ |
| Drawer Divider (1x2) | 1 | 3/4" × 1" × 16" | — | ☐ |
| Drawer Box Sides (3/4" plywood) | 8 | 3/4" × 4" × 16" | — | ☐ |
| Drawer Box Front/Back (3/4" plywood) | 8 | 3/4" × 4" × 13" | — | ☐ |
| Drawer Bottom Panel (1/4" plywood) | 4 | 1/4" × 14" × 15" | — | ☐ |
| Drawer Fronts (3/4" plywood) | 4 | 3/4" × 5" × 15" | — | ☐ |
| Top Panel (3/4" plywood) | 1 | 3/4" × 21" × 21" | — | ☐ |
| Side Trim (1x2) | 9 | 3/4" × 1" × 16" | — | ☐ |
Materials
| Item | Qty | ✓ |
|---|---|---|
| 4x8 sheet 3/4" plywood | 1 board | ☐ |
| 4x4 sheet 1/4" plywood | 1 board | ☐ |
| 2x2x8 board, 1 1/2" x 1 1/2" x 96" | 2 board | ☐ |
| 1x2x8 board, 3/4" x 1 1/2" x 96" | 2 board | ☐ |
| 1 1/4" pocket hole screws | 1 each | ☐ |
| 2 1/2" pocket hole screws | 1 each | ☐ |
| 1 1/4" brad nails | 1 each | ☐ |
| Pair 16" ball bearing drawer slides | 4 each | ☐ |
| Edge banding | 1 each | ☐ |
| Wood glue | 1 each | ☐ |
| 5/8" wood screws (to install slides) | 1 each | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.