NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A small open shelf box with a flat metal bar across the front edge instead of a lip — just enough to keep things from sliding off.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Bottom/back | 2 | 3/4" × 7 1/4" × 39 1/2" | Pine 1x8 | ☐ |
| Sides | 2 | 3/4" × 7 1/4" × 8" | Pine 1x8 | ☐ |
| Front rail | 1 | 3/16" × 3/4" × 41" | Flat metal stock | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Pine, 1x8, 8 ft Sides and bottom/back — buy two boards for clean offcuts and to allow for knots. | 2 each | ☐ |
| 3/4"-wide flat metal stock, 41" length Hardware-store bar stock, cut to length. | 1 each | ☐ |
| Brad nails, 1-1/4" | 1 box | ☐ |
| Wood glue | 2 oz | ☐ |
| 2" self-tapping wood screws or 1-1/4" pocket hole screws | 1 box | ☐ |
| Wall-mounting screws Choose for your wall type — 2-1/2" screws into studs through drywall is typical. | 1 each | ☐ |
Overall cost: $. Lumber varies by region, species, and season, so we give a band rather than a figure.