NotchUse your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
Simple 1-Hour Child Coloring Desk
Build this simple coloring desk for your little one in about an hour with these easy plans!
- Difficulty
- Beginner
- Time
- 2–3.8 hours
- Cost
- $$
Cut list
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Desk Legs | 4 | 1 1/2" × 1 1/2" × 17" | — | ☐ |
| Desk Legs (Long Sides) | 4 | 1 1/2" × 1 1/2" × 25" | — | ☐ |
| Desk Top | 1 | 1/2" × 21" × 34" | — | ☐ |
| Desk Leg Support Pieces | 2 | 1 1/2" × 1 1/2" × 33" | — | ☐ |
Materials
| Item | Qty | ✓ |
|---|---|---|
| Plywood, 1/2" Thick Half Sheet | 1 board | ☐ |
| Select Pine, 2x2 96" | 3 board | ☐ |
| 1" Kreg Pocket Hole Screws (coarse thread) | 40 each | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.
Tools
- Circular Saw
- Drill / Driver
- Miter Saw
- Pocket Hole Jig
- Random Orbit Sander
Instructions
1. Drill Pocket Holes In Desk Legs
Drill two pocket holes in either end of the four 17" leg pieces, and the 33" leg pieces.
2. Assemble Legs
Create two rectangles by connecting the two 17" leg pieces to the two 25" leg pieces. Be sure the pocket holes are facing outward, and the edges are flush.
3. Attach Support Pieces
Attach the two sets of legs using the 33" support piece between. Place the second 33" support piece on the opposite side.
4. Attach Legs to Desk Top
Place the assembled legs on the desk top (pocket hole side down), with a 1/2" overhang on all sides. Screw through the legs into the desk top to secure in place.
5. Paint, Stain, Or Seal
- Sand all the edges very smooth (no splinters for your little ones!), and optionally route the edges of the desk top.
- Finally paint, stain, or just seal the wood if you choose to leave it in it's natural finish.
- Then enjoy!
