Side Hutch for the Classic Storage Collection — board plan

What to buy, and which parts come off which board.

Buy 6 boards at 8 ft.

3/4" × 15 1/2" — 3/4 in plywood

2 boards · 16.7 board feet (includes 15% for knots and defects) · 95% of the boards you buy used

Board 1 · 6 1/4" left over
44 1/4"44 1/4"
1. Sides — 44 1/4"
2. Sides — 44 1/4"
Board 2 · 3" left over
24"22 1/2"22 1/2"22 1/2"
1. Top — 24"
2. Bottom and shelves — 22 1/2"
3. Bottom and shelves — 22 1/2"
4. Bottom and shelves — 22 1/2"

3/4" × 2 1/2" — 1x3

1 board · 0.7 board feet (includes 15% for knots and defects) · 48% of the boards you buy used

Board 1 · 49 3/4" left over
24"21"
1. Crown moulding — 24"
2. Front top trim — 21"

3/4" × 1 1/2" — 1x2

3 boards · 1.8 board feet (includes 15% for knots and defects) · 71% of the boards you buy used

Board 1 · 4 3/4" left over
45"45"
1. Side trim — 45"
2. Side trim — 45"
Board 2 · 4 3/4" left over
45"45"
1. Side trim — 45"
2. Side trim — 45"
Board 3 · 73 7/8" left over
21"
1. Back top trim — 21"

Cuts are listed longest-first, which is how they should be made: the awkward pieces get placed while there is still board to place them on. The layout assumes one end of each board is squared off (1") and that every cut costs 1/8" of kerf — the reason six 16″ parts do not fit on a 96″ board.

3/4" × 15 1/2" — 3/4 in plywood

Board 1 · 6 1/4" left over

Board 2 · 3" left over

3/4" × 2 1/2" — 1x3

Board 1 · 49 3/4" left over

3/4" × 1 1/2" — 1x2

Board 1 · 4 3/4" left over

Board 2 · 4 3/4" left over

Board 3 · 73 7/8" left over