Notch← Back to the plan
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
Shop Worktable
This rolling shop worktable is designed to hold and store your saws, compressors and other cutting and drilling tools.
- Difficulty
- Intermediate
- Time
- 5.8–11.3 hours
- Cost
- $$$
Cut list
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Bottom frame long pieces | 2 | 2" × 4" × 53" | — | ☐ |
| Bottom frame short pieces | 2 | 2" × 4" × 32" | — | ☐ |
| Legs | 4 | 4" × 4" × 30" | — | ☐ |
| Top frame long pieces | 2 | 2" × 4" × 60" | — | ☐ |
| Top frame short pieces | 2 | 2" × 4" × 42" | — | ☐ |
| Table top | 1 | 3/4" × 48" × 72" | — | ☐ |
| Drawer pocket sides | 4 | 3/4" × 3" × 24" | — | ☐ |
| Drawer pocket tops | 2 | 3/4" × 24" × 26" | — | ☐ |
| Drawer pocket back | 1 | 1" × 4" × 72" | — | ☐ |
| Drawer sides | 4 | 1/2" × 2" × 24" | — | ☐ |
| Drawer back | 2 | 1/2" × 2" × 22" | — | ☐ |
| Drawer bottoms | 2 | 1/2" × 22" × 23" | — | ☐ |
| Drawer fronts | 2 | 1" × 4" × 26" | — | ☐ |
| Table saw shelf upright | 2 | 2" × 4" × 24" | — | ☐ |
| Table saw shelf | 2 | 2" × 4" × 20" | — | ☐ |
| Table saw shelf support | 2 | 2" × 4" × 23" | — | ☐ |
Materials
| Item | Qty | ✓ |
|---|---|---|
| Board, 2x4 96" | 5 board | ☐ |
| Plywood, 3/4" Thick Full Sheet | 1 board | ☐ |
| Plywood, 1/2" Thick Full Sheet | 1 board | ☐ |
| Plywood, 1/2" Thick Half Sheet | 1 board | ☐ |
| Board, 1x4 96" | 2 board | ☐ |
| 24" drawer slides | 2 each | ☐ |
| Drawer pulls | 2 each | ☐ |
| Locking casters 4" tall | 4 each | ☐ |
| Powerstrip | 1 each | ☐ |
| Box of 1" Kreg jig screws | 1 each | ☐ |
| Box of 2 1/4" kreg jig screws | 1 each | ☐ |
| 3/8"x 3/4" lags | 16 each | ☐ |
| Bottle of wood glue | 1 each | ☐ |
| Box of 1 1/4" staples | 1 each | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.