NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A low, 54"-wide dresser with seven drawers on euro slides — plywood sides in a 2x2/1x2 face-framed carcass, with 1x3 dividers that ARE the drawer-slide layout jig.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Side panels | 2 | 3/4" × 15 1/2" × 26 1/4" | 3/4" plywood | ☐ |
| Legs | 4 | 1 1/2" × 1 1/2" × 31 1/4" | 2x2 | ☐ |
| Back and bottom supports | 2 | 1 1/2" × 1 1/2" × 49 1/2" | 2x2 | ☐ |
| Front/back rails | 6 | 3/4" × 1 1/2" × 49 1/2" | 1x2 | ☐ |
| Vertical dividers Flush front, 1" overhang inside — the slide-mounting surface. Place with spacer blocks, front matching back exactly. | 8 | 3/4" × 2 1/2" × 7 1/2" | 1x3 | ☐ |
| Bottom center support | 1 | 1 1/2" × 1 1/2" × 15 1/2" | 2x2 | ☐ |
| Top | 1 | 3/4" × 15 1/2" × 54 1/2" | 3/4" plywood | ☐ |
| Top trim, 1x2 | 1 | 3/4" × 1 1/2" × 54 1/2" | 1x2 | ☐ |
| Top trim, 1x3 | 1 | 3/4" × 2 1/2" × 54 1/2" | 1x3 | ☐ |
| Back | 1 | 1/4" × 26 1/4" × 52 1/2" | 1/4" plywood | ☐ |
| Drawer sides Drawers are CUT TO FIT their measured openings — fronts/backs per the slide spec, faces from 1x8 with 1/8" gaps. | 14 | 3/4" × 5 1/2" × 16" | 1x6 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Plywood, 3/4", 4x8 sheet, ripped into 15-1/2" strips Sides and top — about half the sheet; the leftover strips are free future shelves. | 1 each | ☐ |
| 2x2, 8 ft Legs and bottom supports. | 3 each | ☐ |
| 1x2, 10 ft Front/back rails between drawers, and top trim. | 4 each | ☐ |
| 1x3, 10 ft The vertical dividers — the drawer-slide layout jig. | 1 each | ☐ |
| 1x6, 8 ft Drawer boxes. | 6 each | ☐ |
| 1x8, 8 ft Drawer faces. Plan assumes a true 7-1/4" width — measure yours. | 2 each | ☐ |
| Plywood, 1/4", 4x8 sheet Back and drawer bottoms. | 1 each | ☐ |
| Euro drawer slides, 16" | 7 each | ☐ |
| Knobs or handles Mount them to the faces BEFORE the faces go on. | 7 each | ☐ |
| Pocket hole screws, 1-1/4" and 2-1/2" | 150 each | ☐ |
| Brad nails, 5/8" and 1-1/4" | 200 each | ☐ |
| Wood glue | 8 oz | ☐ |
| Stain or paint | 1 qt | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.