Schoolhouse Desk Hutch — board plan

What to buy, and which parts come off which board.

Buy 6 boards at 8 ft.

3/4" × 9 1/4" — Pine

2 boards · 9.4 board feet (includes 15% for knots and defects) · 89% of the boards you buy used

Board 1 · 3 1/4" left over
46 1/2"45"
1. Top — 46 1/2"
2. Bottom shelf — 45"
Board 2 · 17" left over
30 1/4"30 1/4"8 1/2"8 1/2"
1. Sides — 30 1/4"
2. Sides — 30 1/4"
3. Dividers — 8 1/2"
4. Dividers — 8 1/2"

3/4" × 3 1/2" — Pine

1 board · 0.9 board feet (includes 15% for knots and defects) · 48% of the boards you buy used

Board 1 · 49 7/8" left over
45"
1. Front trim rail — 45"

3/4" × 1 1/2" — Pine

2 boards · 1.0 board feet (includes 15% for knots and defects) · 59% of the boards you buy used

Board 1 · 1 3/4" left over
48"45"
1. Front trim, top — 48"
2. Bottom trim — 45"
Board 2 · 76 1/4" left over
9 1/4"9 1/4"
1. Side trim — 9 1/4"
2. Side trim — 9 1/4"

1/4" × 46 1/2" — Plywood, corkboard, or wainscoting panel

1 board · 2.9 board feet (includes 15% for knots and defects) · 33% of the boards you buy used

Board 1 · 63 7/8" left over
31"
1. Back panel — 31"

Cuts are listed longest-first, which is how they should be made: the awkward pieces get placed while there is still board to place them on. The layout assumes one end of each board is squared off (1") and that every cut costs 1/8" of kerf — the reason six 16″ parts do not fit on a 96″ board.

3/4" × 9 1/4" — Pine

Board 1 · 3 1/4" left over

Board 2 · 17" left over

3/4" × 3 1/2" — Pine

Board 1 · 49 7/8" left over

3/4" × 1 1/2" — Pine

Board 1 · 1 3/4" left over

Board 2 · 76 1/4" left over

1/4" × 46 1/2" — Plywood, corkboard, or wainscoting panel

Board 1 · 63 7/8" left over