NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A rolling kitchen island in the Rustic X family — X-braced ends, slatted bottom shelf, two shallow drawers on waxed wood cleats, and a project-panel top on casters.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Legs | 4 | 1 1/2" × 3 1/2" × 32 1/4" | 2x4 | ☐ |
| Leg tops/bottoms NOT flush to the legs' outsides/bottoms — the inset is deliberate. | 4 | 1 1/2" × 3 1/2" × 19 1/2" | 2x4 | ☐ |
| X full diagonals Both ends 45°, parallel, long point to long point. | 2 | 1 1/2" × 3 1/2" × 27 5/8" | 2x4 | ☐ |
| X half pieces One end 45°, longest point. | 4 | 1 1/2" × 3 1/2" × 13 3/4" | 2x4 | ☐ |
| Front bottom apron | 1 | 1 1/2" × 3 1/2" × 43 1/2" | 2x4 | ☐ |
| Middle bottom apron | 1 | 1 1/2" × 3 1/2" × 46 1/2" | 2x4 | ☐ |
| Top aprons / drawer trim | 3 | 1 1/2" × 1 1/2" × 43 1/2" | 2x2 | ☐ |
| Drawer center trim | 1 | 1 1/2" × 1 1/2" × 7 1/2" | 2x2 | ☐ |
| Shelf center trim | 1 | 1 1/2" × 1 1/2" × 17 1/2" | 2x2 | ☐ |
| Shelf/drawer sides The center one is the drawer reference — EXACTLY centered. | 3 | 3/4" × 11 1/4" × 31 1/2" | 1x12 | ☐ |
| Drawer bay backs | 2 | 3/4" × 9 1/4" × 22 1/8" | 1x10 | ☐ |
| Bottom shelf slats | 14 | 3/4" × 2 1/2" × 14 1/4" | 1x3 | ☐ |
| Shelves Fixed with pocket holes, or adjustable on shelf pins. | 2 | 3/4" × 11 1/4" × 22 1/8" | 1x12 | ☐ |
| Drawer slide cleats, 2x2 Two screws each at first — you WILL adjust them. | 4 | 1 1/2" × 1 1/2" × 10 1/2" | 2x2 | ☐ |
| Drawer sides Drawers are CUT TO FIT — the list's numbers are guides only. | 4 | 3/4" × 5 1/2" × 11 1/4" | 1x6 | ☐ |
| Drawer fronts/backs Opening between 2x2s minus 1/4". | 4 | 3/4" × 5 1/2" × 17 3/8" | 1x6 | ☐ |
| Drawer bottoms | 2 | 1/2" × 9 3/4" × 17 3/8" | 1/2" plywood | ☐ |
| Drawer cleats, 1x2 | 4 | 3/4" × 1 1/2" × 11 1/4" | 1x2 | ☐ |
| Drawer faces Cut to the openings, 1/8" gaps. | 2 | 3/4" × 7 1/4" × 20 3/4" | 1x8 | ☐ |
| Top trim, sides | 2 | 3/4" × 1 1/2" × 24" | 1x2 | ☐ |
| Top trim, front/back | 2 | 3/4" × 1 1/2" × 50 1/2" | 1x2 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Project panel, 3/4", 24" x 52" The top. Premade panel recommended — flat and ready. | 1 each | ☐ |
| 2x4, 8 ft Legs, aprons, X braces. | 5 each | ☐ |
| 2x2, 8 ft Top aprons, trim, and the drawer cleats. | 3 each | ☐ |
| 1x12, 8 ft Shelf/drawer bay sides — the 31-1/2" pieces. | 1 each | ☐ |
| 1x12, 4 ft The shelves. | 1 each | ☐ |
| 1x3, 8 ft Bottom shelf slats. | 3 each | ☐ |
| 1x2, 8 ft Top trim and drawer cleats. | 3 each | ☐ |
| 1x6, 10 ft Drawer boxes. | 1 each | ☐ |
| 1x8, 4 ft Drawer faces. | 1 each | ☐ |
| 1x10, 4 ft Drawer bay backs. | 1 each | ☐ |
| Plywood, 1/2", 10" x 18" pieces Drawer bottoms — scraps qualify. | 2 each | ☐ |
| Casters Two locking minimum — a rolling island near a stove wants brakes. | 4 each | ☐ |
| Pocket hole screws, 1-1/4" and 2-1/2" | 100 each | ☐ |
| Finish nails, 1-1/4" | 100 each | ☐ |
| Wood glue | 8 oz | ☐ |
| Candle wax The drawer-slide lubricant. Any plain candle. | 1 each | ☐ |
| Stain and finish | 1 qt | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.