NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A small X-braced end table with 2x4 leg pairs, a 2x2 apron, and a planked 2x6 top — cross braces traced and cut in place rather than to a fixed angle, finished with decorative bolt hardware.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Legs | 8 | 1 1/2" × 3 1/2" × 22 1/2" | 2x4, 8 ft | ☐ |
| Trim | 4 | 1 1/2" × 1 1/2" × 16" | 2x2, 8 ft | ☐ |
| Bottom shelf | 2 | 3/4" × 11 1/4" × 16" | 1x12, 3 ft | ☐ |
| X main diagonals Long point to short point, ends parallel, 50° off square. Trace and cut in place for best fit. | 2 | 1 1/2" × 1 1/2" × 26 1/2" | 2x2, 8 ft | ☐ |
| X fill pieces One end at 50° off square, other end at 10° off square. Trace and cut in place. | 4 | 1 1/2" × 1 1/2" × 13 1/4" | 2x2, 8 ft | ☐ |
| Top | 5 | 1 1/2" × 5 1/2" × 27" | 2x6, 8 ft | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 2x4, 8 ft | 2 each | ☐ |
| 1x12, 3 ft Bottom shelf. | 1 each | ☐ |
| 2x2, 8 ft Trim and X bracing. | 2 each | ☐ |
| 2x6, 8 ft Top. | 2 each | ☐ |
| Decorative bolt hardware | 1 set | ☐ |
| Pocket hole screws, 2-1/2" and 1-1/4" | 40 each | ☐ |
| Wood glue | 2 oz | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.