NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A changing table with X-braced 2x3 side frames, an edge-joined 2x6 top surface and matching middle shelf, a plywood back, and a low topper to keep the pad in place.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Side frame uprights | 4 | 1 1/2" × 2 1/2" × 31 1/2" | Pine 2x3 | ☐ |
| Side frame rails | 4 | 1 1/2" × 1 1/2" × 15" | Pine 2x2 | ☐ |
| X-brace, long diagonal Approximate — scribe and cut to fit directly off your assembled side frame, mitered at both ends. | 2 | 1 1/2" × 1 1/2" × 35" | Pine 2x2 | ☐ |
| X-brace, short diagonal Approximate — two pieces per frame meet at a lap joint where they cross the long diagonal. Scribe to fit. | 4 | 1 1/2" × 1 1/2" × 18" | Pine 2x2 | ☐ |
| Top surface boards | 3 | 1 1/2" × 5 1/2" × 44" | Pine 2x6 | ☐ |
| Top surface cleats Approximate — match to your assembled frame depth. | 2 | 1 1/2" × 1 1/2" × 15" | Pine 2x2 | ☐ |
| Middle shelf boards | 3 | 1 1/2" × 5 1/2" × 44" | Pine 2x6 | ☐ |
| Back panel | 1 | 1/4" × 24" × 45 1/2" | Plywood, 1/4" | ☐ |
| Topper end pieces Forms a low raised end-stop on each end of the top surface. | 4 | 3/4" × 3 1/2" × 17" | Pine 1x4 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Pine, 1x4, 8 ft | 1 each | ☐ |
| Pine, 1x4, 6 ft | 1 each | ☐ |
| Pine, 2x2, 8 ft | 4 each | ☐ |
| Pine, 2x3, 8 ft | 3 each | ☐ |
| Pine, 2x6, 8 ft | 5 each | ☐ |
| Plywood, 1/4", 24" x 48" | 1 each | ☐ |
| Pocket hole screws, 1-1/4" and 2-1/2" | 1 box | ☐ |
| Wood screws, 2" | 1 box | ☐ |
| Wood glue | 4 oz | ☐ |
| Stain or finish | 1 can | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.