NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A 1x12 media console with a big lower drawer, an adjustable center shelf, and built-up legs. Beadboard back and a cut-out footer give it the rustic look.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Cabinet sides | 2 | 3/4" × 11 1/4" × 23 3/4" | 1x12 | ☐ |
| Shelves and bottom | 3 | 3/4" × 11 1/4" × 38" | 1x12 | ☐ |
| Drawer guides Ripped to ~1" wide. | 2 | 3/4" × 1" × 11 1/4" | 1x12 | ☐ |
| Cabinet top | 1 | 3/4" × 11 1/4" × 39 1/2" | 1x12 | ☐ |
| Top side trim | 2 | 3/4" × 1 1/2" × 11 1/2" | 1x2 | ☐ |
| Top front/back trim | 2 | 3/4" × 1 1/2" × 41" | 1x2 | ☐ |
| Leg sides | 4 | 3/4" × 1 1/2" × 26 1/2" | 1x2 | ☐ |
| Leg fronts/backs | 4 | 3/4" × 2 1/2" × 26 1/2" | 1x3 | ☐ |
| Back bottom trim | 1 | 3/4" × 1 1/2" × 36" | 1x2 | ☐ |
| Side footer (cut-out) | 2 | 3/4" × 3 1/2" × 8 1/2" | 1x4 | ☐ |
| Front footer | 1 | 3/4" × 3 1/2" × 36" | 1x4 | ☐ |
| Front middle shelf trim | 1 | 3/4" × 1 1/2" × 36" | 1x2 | ☐ |
| Beadboard back | 1 | 1/4" × 25 1/4" × 41" | 1/4 in beadboard | ☐ |
| Drawer bottom | 1 | 3/4" × 11 1/4" × 34 1/4" | 1x12 | ☐ |
| Drawer back | 1 | 3/4" × 5 1/2" × 34 1/4" | 1x6 | ☐ |
| Drawer sides | 2 | 3/4" × 5 1/2" × 12 1/4" | 1x6 | ☐ |
| Drawer front | 1 | 3/4" × 5 1/2" × 35 3/4" | 1x6 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x12, 8 ft Sides, shelves, top, drawer parts. | 3 each | ☐ |
| 1x2, 8 ft Top trim, leg sides, shelf trim. | 4 each | ☐ |
| 1x3, 8 ft Leg fronts and backs. | 2 each | ☐ |
| 1x4, 4 ft Footer pieces. | 1 each | ☐ |
| 1x6, 8 ft Drawer sides, back, and front. | 1 each | ☐ |
| Beadboard plywood, 1/4 in Back panel, ~41" x 25-1/4". | 1 each | ☐ |
| Drawer pull and shelf-pin brackets | 1 set | ☐ |
| Brad nails, 1-1/4 in and 2 in | 1 box | ☐ |
| Wood glue | 1 bottle | ☐ |
| Stain or paint | 1 quart | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.