Rolling Vertical Scrap Wood Storage

Attach casters to the underside of the Base.

Drill five pocket holes along one long side of the Plywood Edge. Using wood glue and pocket screws, attach the Plywood Edge along one side of the Base.

• Drill five pocket holes along one long side of the Cubby Back. Using wood glue and pocket screws, attach the Cubby Back to the Base 11 1/4" from the edge.
• Drill two pocket holes on one 9 1/2" and one 11 1/4" side of each Cubby Side. Using wood glue and pocket screws, attach two of the Cubby Sides on the far edges of the Base and the other two Cubby Sides spaced out depending on your needs.

• On each of the Vertical Posts, drill two 3/4" pocket holes on one end and two 1 1/2" pocket holes on the other end. Using wood glue and pocket screws, attach the Vertical Posts to the Horizontal Post with the 1 1/2" pocket hole side.
• Attach one Vertical Post on each end, one in the middle and the other two spaced evenly between. Using wood glue and pocket screws, attach the five Vertical Posts to the Base flush along the back of the Cubby Back.
• Insert a 2" screw through Cubby Back into each Vertical Post for added stability.

Drill two pocket holes on the angled end of each of the 20 Racks. Using wood glue and pocket screws, attach the first five Racks into the Vertical Posts along the top edge of the Cubby Back. Using a Rack as a spacer, continue to attach each Rack up each Vertical Post.

Load in all your wood. Place long boards along the racks, small scraps in the cubbies, and lean plywood on the back side.

Enjoy your handiwork and tag @CharlestonCrafted on Instagram with a picture!