Skip to content
Notch
← Back to the plan

Rolling Vertical Scrap Wood Storage — board plan

What to buy, and which parts come off which board.

Buy 12 boards at 8 ft.

1" × 3"

8 boards · 14.7 board feet (includes 15% for knots and defects) · 81% of each board consumed

  1. Board 1 · 10 3/4" left over

    1. Horizontal Post — 72"
    2. Racks with 10 degree angle on one end — 12"

  2. Board 2 · 10 5/8" left over

    1. Vertical Posts — 60"
    2. Racks with 10 degree angle on one end — 12"
    3. Racks with 10 degree angle on one end — 12"

  3. Board 3 · 10 5/8" left over

    1. Vertical Posts — 60"
    2. Racks with 10 degree angle on one end — 12"
    3. Racks with 10 degree angle on one end — 12"

  4. Board 4 · 10 5/8" left over

    1. Vertical Posts — 60"
    2. Racks with 10 degree angle on one end — 12"
    3. Racks with 10 degree angle on one end — 12"

  5. Board 5 · 10 5/8" left over

    1. Vertical Posts — 60"
    2. Racks with 10 degree angle on one end — 12"
    3. Racks with 10 degree angle on one end — 12"

  6. Board 6 · 10 5/8" left over

    1. Vertical Posts — 60"
    2. Racks with 10 degree angle on one end — 12"
    3. Racks with 10 degree angle on one end — 12"

  7. Board 7 · 10 1/8" left over

    1. Racks with 10 degree angle on one end — 12"
    2. Racks with 10 degree angle on one end — 12"
    3. Racks with 10 degree angle on one end — 12"
    4. Racks with 10 degree angle on one end — 12"
    5. Racks with 10 degree angle on one end — 12"
    6. Racks with 10 degree angle on one end — 12"
    7. Racks with 10 degree angle on one end — 12"

  8. Board 8 · 70 3/4" left over

    1. Racks with 10 degree angle on one end — 12"
    2. Racks with 10 degree angle on one end — 12"

3/4" × 24"

1 board · 10.3 board feet (includes 15% for knots and defects) · 76% of each board consumed

  1. Board 1 · 22 7/8" left over

    1. Base — 72"

3/4" × 9"

2 boards · 6.3 board feet (includes 15% for knots and defects) · 62% of each board consumed

  1. Board 1 · 5/8" left over

    1. Cubby Back — 72"
    2. Cubby Sides — 11"
    3. Cubby Sides — 11"

  2. Board 2 · 72 3/4" left over

    1. Cubby Sides — 11"
    2. Cubby Sides — 11"

3/4" × 3"

1 board · 1.3 board feet (includes 15% for knots and defects) · 76% of each board consumed

  1. Board 1 · 22 7/8" left over

    1. Plywood Edge — 72"

Cuts are listed longest-first, which is how they should be made: the awkward pieces get placed while there is still board to place them on. The layout assumes one end of each board is squared off (1") and that every cut costs 1/8" of kerf — the reason six 16″ parts do not fit on a 96″ board.