Notch← Back to the plan
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
Rolling Tool Cart
This rolling caddy offers lots of space for storing tools without taking up much floor space.
- Difficulty
- Easy
- Time
- 5.8–11.3 hours
- Cost
- $$$
Cut list
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| End Rail | 6 | 3/4" × 2" × 17" | — | ☐ |
| End Stile | 4 | 3/4" × 2" × 44" | — | ☐ |
| Upper Side Rail | 2 | 3/4" × 2" × 20" | — | ☐ |
| Middle Side Rail | 2 | 3/4" × 2" × 20" | — | ☐ |
| Lower Side Rail | 2 | 3/4" × 2" × 20" | — | ☐ |
| Side Stile | 4 | 3/4" × 1" × 44" | — | ☐ |
| End Panel | 2 | 3" × 22" × 44" | — | ☐ |
| Bottom Frame Rail | 2 | 3/4" × 2" × 15" | — | ☐ |
| Bottom Frame Stile | 2 | 3/4" × 2" × 22" | — | ☐ |
| Top | 1 | 3" × 20" × 22" | — | ☐ |
| Fixed Shelf | 1 | 3" × 20" × 22" | — | ☐ |
| Bottom | 1 | 3" × 20" × 22" | — | ☐ |
| Adjustable Shelf | 1 | 3" × 19" × 22" | — | ☐ |
| Adjustable Shelf Trim | 2 | 3/4" × 1" × 19" | — | ☐ |
| Tray Base | 1 | 3" × 23" × 23" | — | ☐ |
| Tray Ends | 2 | 3/4" × 2" × 23" | — | ☐ |
| Tray Sides | 2 | 3/4" × 2" × 24" | — | ☐ |
Materials
| Item | Qty | ✓ |
|---|---|---|
| Board, 1x2 x 48" | 1 board | ☐ |
| Board, 1x2 x 96" | 3 board | ☐ |
| Board, 1x3 x 48" | 1 board | ☐ |
| Board, 1x3 x 96" | 6 board | ☐ |
| Plywood, 3/4" plywood, 48" x 96" | 1 board | ☐ |
| Plywood, 3/4" plywood, 24" x 48" | 1 board | ☐ |
| 1 1/4" coarse-thread Kreg Pocket-Hole Screws | 154 each | ☐ |
| 2 1/2" Locking swivel casters | 2 each | ☐ |
| Shelf pins | 4 each | ☐ |
| Utility pulls | 2 each | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.