NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
Plywood cart on locking casters, sized to double as table saw outfeed. Solves two problems with one box.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Sides Height depends on YOUR saw. See step 1 — do not use this number blindly. | 2 | 3/4" × 24" × 30" | Plywood | ☐ |
| Top | 1 | 3/4" × 24" × 48" | Plywood | ☐ |
| Bottom shelf | 1 | 3/4" × 24" × 46 1/2" | Plywood | ☐ |
| Middle shelf | 1 | 3/4" × 24" × 46 1/2" | Plywood | ☐ |
| Back Full plywood back. This is what stops the cart racking as it rolls over a cord. | 1 | 3/4" × 30" × 46 1/2" | Plywood | ☐ |
| Divider Optional. Splits the shelves so things don't slide around. | 1 | 3/4" × 23" × 22" | Plywood | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Birch or shop-grade plywood, 3/4", 4x8 Shop-grade is fine here. Nobody is inspecting your cart's veneer. | 2 sheet | ☐ |
| Locking swivel casters, 3" ALL FOUR must lock. Rated for 200+ lbs each — this cart will end up holding far more than you think. | 4 each | ☐ |
| Pocket hole screws, 1-1/4" | 80 each | ☐ |
| Wood glue | 8 oz | ☐ |
| Clear interior finish (hardwax oil or wipe-on poly) Optional, but a sealed top wipes clean and lets work slide instead of catching. | 8 oz | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.