Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.

Rolling Lumber Storage Cart

Three vertical 2x4 rack frames on a rolling base — stores full-length lumber upright instead of leaned against a wall.

Cut list

Part	Qty	T × W × L	Material	✓
Bottom frame sides	2	1 1/2" × 3 1/2" × 60"	2x4	☐
Bottom frame ends	2	1 1/2" × 3 1/2" × 30"	2x4	☐
Bottom frame middles Divides the bottom frame into the three storage bays.	4	1 1/2" × 3 1/2" × 27"	2x4	☐
Upright legs Two per rack frame, three rack frames.	6	1 1/2" × 3 1/2" × 60"	2x4	☐
Upright rungs	9	1 1/2" × 3 1/2" × 24"	2x4	☐
Top tie-ins Ties the three rack frames together at the top.	4	1 1/2" × 3 1/2" × 24 3/4"	2x4	☐

Item	Qty	✓
Construction lumber, 2x4, 10 ft Line total for all ten boards.	10 each	☐
Locking swivel casters, 5" Line total for all four — a loaded lumber cart is heavy and low-clearance casters bind on shop floor debris.	4 each	☐
2-1/2" self-tapping star bit screws	100 each	☐
2-1/2" pocket hole screws Optional, for the upper tie-ins.	16 each	☐

Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.