Notch← Back to the plan
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
Rolling Benchtop Tool Stand
Benchtop tool stands can be expensive, and using your benchtop tools on traditional stands is awkward.
- Difficulty
- Intermediate
- Time
- 4.3–8.3 hours
- Cost
- $$
Cut list
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Bench Top | 5 | 2" × 4" × 32" | — | ☐ |
| Shelves | 3 | 2" × 4" × 32" | — | ☐ |
| Shelves | 2 | 2" × 4" × 29" | — | ☐ |
| Large Frame Pieces | 4 | 2" × 4" × 29" | — | ☐ |
| Short Frame Pieces | 4 | 2" × 4" × 10" | — | ☐ |
| Legs | 4 | 2" × 4" × 19" | — | ☐ |
| Supports | 4 | 2" × 4" × 14" | — | ☐ |
Materials
| Item | Qty | ✓ |
|---|---|---|
| Board, 2x4 96" | 7 board | ☐ |
| 2 1/2" Kreg Pocket Hole Screws | 100 each | ☐ |
| Rolling Casters | 4 each | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.