Skip to content
Notch
← Back to the plan

Record Player Stand with Storage — board plan

What to buy, and which parts come off which board.

Buy 7 boards at 8 ft.

3/4" × 15"

1 board · 8.2 board feet (includes 15% for knots and defects) · 96% of each board consumed

  1. Board 1 · 3 3/8" left over

    1. Fixed Middle Shelf — 19"
    2. Outside Panel — 18"
    3. Outside Panel — 18"
    4. Inside Panel — 18"
    5. Inside Panel — 18"

3/4" × 14"

1 board · 3.8 board feet (includes 15% for knots and defects) · 48% of each board consumed

  1. Board 1 · 49 7/8" left over

    1. Bottom Panel — 45"

3/4" × 13"

1 board · 3.6 board feet (includes 15% for knots and defects) · 49% of each board consumed

  1. Board 1 · 48 5/8" left over

    1. Adjustable Shelf — 18"
    2. Left Top Panel — 14"
    3. Right Top Panel — 14"

3/4" × 12"

1 board · 4.6 board feet (includes 15% for knots and defects) · 68% of each board consumed

  1. Board 1 · 30 1/2" left over

    1. Door — 18"
    2. Door — 18"
    3. Fixed Cabinet Shelf — 14"
    4. Fixed Cabinet Shelf — 14"

3/4" × 1"

2 boards · 0.8 board feet (includes 15% for knots and defects) · 70% of each board consumed

  1. Board 1 · 4 1/2" left over

    1. Bottom Edging — 48"
    2. Side Edging — 14"
    3. Side Edging — 14"
    4. Side Edging — 14"

  2. Board 2 · 52 5/8" left over

    1. Side Edging — 14"
    2. Top Edging — 14"
    3. Top Edging — 14"

1/4" × 20"

1 board · 1.8 board feet (includes 15% for knots and defects) · 49% of each board consumed

  1. Board 1 · 48 7/8" left over

    1. Back Panel — 46"

Cuts are listed longest-first, which is how they should be made: the awkward pieces get placed while there is still board to place them on. The layout assumes one end of each board is squared off (1") and that every cut costs 1/8" of kerf — the reason six 16″ parts do not fit on a 96″ board.