Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.

Raised Farmhouse Toy & Blanket Bin

An open plywood bin on 2x2 legs — one sheet of plywood, no drawer slides, no doors, just a box that's easier to reach into than a floor bin.

Cut list

Part	Qty	T × W × L	Material	✓
Sides and bottom	3	3/4" × 15 1/2" × 32"	Plywood or MDF	☐
End panels Cut from the leftover material after the sides and bottom.	2	3/4" × 15 1/2" × 15 1/2"	Plywood or MDF	☐
Legs	4	1 1/2" × 1 1/2" × 32"	Pine	☐

Item	Qty	✓
Plywood or MDF, 3/4", half sheet Have the store rip it into 15-1/2" wide strips, 4 ft long — much easier to haul and cut down at home.	1 each	☐
Pine, 2x2, 8 ft	2 each	☐
Pocket hole screws, 1-1/4" Or 2-1/2" self-tapping wood screws as an alternative.	1 box	☐
Wood glue	3 oz	☐
Sandpaper, assorted grit	3 sheet	☐

Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.