Wood Pullout Cabinet Drawer Organizer — board plan

What to buy, and which parts come off which board.

Buy 3 boards at 8 ft.

1 1/2" × 1 1/2" — 2x2

1 board · 0.8 board feet (includes 15% for knots and defects) · 45% of the boards you buy used

Board 1 · 52 3/4" left over
21"21"
1. Slide rails — 21"
2. Slide rails — 21"

3/4" × 5 1/2" — 1x6

1 board · 2.2 board feet (includes 15% for knots and defects) · 70% of the boards you buy used

Board 1 · 28 1/2" left over
20"20"13"13"
1. Tray sides — 20"
2. Tray sides — 20"
3. Tray front/back — 13"
4. Tray front/back — 13"

1/4" × 14 1/2" — 1/4" plywood

1 board · 0.6 board feet (includes 15% for knots and defects) · 22% of the boards you buy used

Board 1 · 74 7/8" left over
20"
1. Tray bottom — 20"

Cuts are listed longest-first, which is how they should be made: the awkward pieces get placed while there is still board to place them on. The layout assumes one end of each board is squared off (1") and that every cut costs 1/8" of kerf — the reason six 16″ parts do not fit on a 96″ board.

1 1/2" × 1 1/2" — 2x2

Board 1 · 52 3/4" left over

3/4" × 5 1/2" — 1x6

Board 1 · 28 1/2" left over

1/4" × 14 1/2" — 1/4" plywood

Board 1 · 74 7/8" left over