Pull-Out Sorting Laundry Station

Drill two 3/4" pocket holes on each end of the short side support boards. Attach to legs with 1-1/4" pocket holes, also drilling holes facing upward on the top boards for attaching the tabletop later. Build two leg sets.

Drill pocket holes on the front/back support boards and attach to the legs to complete the table frame.

Attach the top using the predrilled pocket holes with 1-1/4" pocket hole screws. The table is now complete; set aside.

Build two cart face frames from the legs and front/back/side pieces.

Attach the bottom pieces to the cart frame, nailing and gluing in place.

Attach caster wheels to the base of the cart.

Position the cart inside the table frame and install the drawer slides connecting the cart to the table.

Sand all surfaces and apply primer and paint, or stain and poly. Add the canvas sorting bins and handle.