Notch← Back to the plan
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
Pub Chairs
These tall pub chairs look great, whether you have them sitting at a counter or pair them with a pub table (which we’ll show you in another project plan).
- Difficulty
- Intermediate
- Time
- 4.8–9.3 hours
- Cost
- $$
Cut list
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Leg | 4 | 1" × 1" × 31" | — | ☐ |
| Foot Rail | 4 | 1" × 1" × 15" | — | ☐ |
| Back Support | 2 | 1" × 1" × 16" | — | ☐ |
| Seat Front/Back Rail | 2 | 3/4" × 3" × 15" | — | ☐ |
| Seat Left Side Rail | 1 | 3/4" × 3" × 15" | — | ☐ |
| Filler Block | 2 | 1/2" × 2" × 3" | — | ☐ |
| Wide Seat Slat | 2 | 3/4" × 7" × 20" | — | ☐ |
| Narrow Seat Slat | 2 | 3/4" × 1" × 20" | — | ☐ |
| Back Slat | 2 | 3/4" × 3" × 20" | — | ☐ |
| Seat Right Side Rail | 1 | 3/4" × 3" × 15" | — | ☐ |
Materials
| Item | Qty | ✓ |
|---|---|---|
| Board, 2x2 72" | 1 board | ☐ |
| Board, 2x2 96" | 2 board | ☐ |
| Board, 1x4 72" | 1 board | ☐ |
| Board, 1x4 48" | 1 board | ☐ |
| Board, 1x8 48" | 1 board | ☐ |
| Board, 1x2 48" | 1 board | ☐ |
| Board, 1/2" x 3" 36" | 1 board | ☐ |
| 1 1/4" coarse-thread pocket hole screws | 32 each | ☐ |
| 2 1/2" coarse-thread pocket hole screws | 16 each | ☐ |
| 2 1/2" flathead wood screws | 6 each | ☐ |
| 2" flathead wood screws | 8 each | ☐ |
| Wood glue | 1 each | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.