NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A kid-sized coffee cart with a working-looking wooden espresso machine — dowel portafilter, steam wand, and knobs. A charming gift build.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Cart bottom | 1 | 3/4" × 11 1/4" × 25 1/2" | 1x12 | ☐ |
| Cart sides | 2 | 3/4" × 11 1/4" × 17 1/2" | 1x12 | ☐ |
| Cart shelf | 1 | 3/4" × 9 1/4" × 24" | 1x10 | ☐ |
| Cart center panel | 1 | 3/4" × 11 1/4" × 24" | 1x12 | ☐ |
| Cart top support | 1 | 3/4" × 1 1/2" × 26 1/2" | 1x2 | ☐ |
| Cart top | 1 | 3/4" × 11 1/4" × 32 1/2" | 1x12 | ☐ |
| Cart legs | 4 | 2" × 2" × 3" | 2" dowel | ☐ |
| Espresso machine sides Cut identical curved profile with a jigsaw. | 2 | 3/4" × 7 1/4" × 9 1/2" | 1x8 | ☐ |
| Espresso machine front/back | 2 | 3/4" × 7 1/4" × 12" | 1x8 | ☐ |
| Espresso machine top | 1 | 3/4" × 1 1/2" × 13 1/2" | 1x2 | ☐ |
| Espresso machine drip tray | 1 | 3/4" × 2 1/2" × 12" | 1x3 | ☐ |
| Espresso machine panel | 1 | 3/4" × 3 1/2" × 12" | 1x4 | ☐ |
| Portafilter holder | 1 | 2" × 2" × 1 1/2" | 2" dowel | ☐ |
| Portafilter handle | 1 | 3/4" × 3/4" × 5" | 3/4" dowel | ☐ |
| Knobs | 2 | 2" × 2" × 1/2" | 2" dowel | ☐ |
| Steam wand | 1 | 3/4" × 3/4" × 6" | 3/4" dowel | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x12, 10 ft (Pine) Cart body. | 1 each | ☐ |
| 1x10, 2 ft (Pine) Cart shelf. | 1 each | ☐ |
| 1x8, 4 ft (Pine) Espresso machine sides. | 1 each | ☐ |
| 1x3, 2 ft (Pine) | 1 each | ☐ |
| 1x4, 1 ft (Pine) | 1 each | ☐ |
| 1x2, 4 ft (Pine) | 1 each | ☐ |
| 2" diameter dowel, 2 ft Cart legs, portafilter, knobs. | 1 each | ☐ |
| 3/4" diameter dowel, 12" Handle and steam wand. | 1 each | ☐ |
| Wood screws, 2" | 1 box | ☐ |
| Brad nails, 1-1/4" and 5/8" | 1 box | ☐ |
| Wood glue | 6 oz | ☐ |
| Child-safe finish Rated safe once fully cured. | 1 kit | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.
Tools: Brad Nailer, Drill / Driver. Materials: 1x12, 10 ft, 2" diameter dowel, 2 ft, Wood screws, 2", Wood glue
Attach the four dowel legs to the bottom shelf with 2" screws, two per leg. Then attach the cart sides to the bottom — nails and glue are fine here because the center panel will reinforce everything.
Tools: Brad Nailer. Materials: 1x12, 10 ft, 1x10, 2 ft, Brad nails, 1-1/4" and 5/8", Wood glue
Attach the center panel with nails and glue — this is the structural spine of the cart. Then set the shelf on top and attach with nails and glue.
Tools: Brad Nailer. Materials: 1x12, 10 ft, 1x2, 4 ft, Brad nails, 1-1/4" and 5/8", Wood glue
Attach the top support piece, then the top itself, with nails and glue. This completes the cart that the espresso machine sits on.
Tools: Brad Nailer, Jigsaw, Random Orbit Sander. Materials: 1x8, 4 ft, Brad nails, 1-1/4" and 5/8", Wood glue
Cut the two espresso-machine sides with a jigsaw — make them identical, and sand the curves smooth. Then box them together with the front and bottom using 1-1/4" brad nails and glue.
Tools: Brad Nailer, Drill / Driver. Materials: 1x3, 2 ft, 1x4, 1 ft, 2" diameter dowel, 2 ft, 3/4" diameter dowel, 12", Wood glue
Add the drip tray, panel, and top, then the dowel details: the 2" dowel portafilter holder with its 3/4" dowel handle, the two knobs, and the steam wand. Glue these well — small hands grab them constantly. Nail and glue from all sides so nothing works loose.
Tools: Random Orbit Sander. Materials: Child-safe finish
Sand every edge and corner round — this is a toy for a small child, so nothing sharp survives. Finish with a child-safe finish and let it fully cure before it goes into play.