NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A pretend-play store front: a boxy base with a chalkboard back and a sign-holding hutch on top. Light enough that a kid can't tip it.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Base sides | 2 | 3/4" × 5 1/2" × 24" | 1x6 | ☐ |
| Base top | 1 | 3/4" × 5 1/2" × 25 1/2" | 1x6 | ☐ |
| Shelf rungs | 4 | 3/4" × 1 1/2" × 24" | 1x2 | ☐ |
| Back shelves | 3 | 3/4" × 3 1/2" × 24" | 1x4 | ☐ |
| Chalkboard back panel | 1 | 1/4" × 24" × 24" | 1/4" plywood | ☐ |
| Hutch uprights | 2 | 3/4" × 2 1/2" × 30" | 1x3 | ☐ |
| Hutch top rail | 1 | 3/4" × 2 1/2" × 25 1/2" | 1x3 | ☐ |
| Hutch top center piece | 1 | 3/4" × 2 1/2" × 25 1/2" | 1x3 | ☐ |
| Sign side holders | 2 | 3/4" × 1 1/2" × 25 1/2" | 1x2 | ☐ |
| Sign top rail | 2 | 3/4" × 1 1/2" × 27 1/2" | 1x2 | ☐ |
| Dowel Round stock; thickness and width are the diameter. | 1 | 3/4" × 3/4" × 30" | 3/4" dowel | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 1x6 board, 10 ft (Pine) Base sides, top, and back shelves. | 1 each | ☐ |
| 1x2 board, 8 ft (Pine) | 2 each | ☐ |
| 1x4 board, 8 ft (Pine) | 1 each | ☐ |
| 1x3 board, 8 ft (Pine) | 2 each | ☐ |
| 1/4" plywood, 24" x 24" Chalkboard back panel. | 1 each | ☐ |
| 3/4" dowel, 30" Spans the hutch to hang buntings or fabric. | 1 each | ☐ |
| Foam board The signs. Lightweight on purpose — a falling sign shouldn't hurt anyone. | 2 each | ☐ |
| Finish nails, 1-1/4" | 60 each | ☐ |
| Wood glue | 4 oz | ☐ |
| Chalkboard paint | 8 oz | ☐ |
| Craft paint or primer and topcoat | 16 oz | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.