NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A three-bay sideboard on 2x4 frame-and-panel end legs, with a plywood-divided interior, three drawers on real slides, and shaker-style doors framing hobby-stock center panels.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Legs | 4 | 1 1/2" × 3 1/2" × 34 1/2" | 2x4, 8 ft | ☐ |
| Panel end caps | 4 | 1 1/2" × 3 1/2" × 10 1/2" | 2x4, 8 ft | ☐ |
| Side panels | 6 | 3/4" × 3 1/2" × 23 1/2" | 1x4, 8 ft | ☐ |
| Bottom supports | 2 | 1 1/2" × 3 1/2" × 75 1/2" | 2x4, 8 ft | ☐ |
| Bottom shelf | 1 | 3/4" × 16 3/4" × 75 1/2" | 3/4" hardwood plywood, full sheet | ☐ |
| Cabinet bay floors | 2 | 3/4" × 16 3/4" × 30 1/4" | 3/4" hardwood plywood, full sheet | ☐ |
| Center divider trim | 2 | 3/4" × 3 1/2" × 18 1/8" | 1x4, 8 ft | ☐ |
| Front trim, top/bottom rails | 2 | 3/4" × 1 1/2" × 75 1/2" | 1x2, 8 ft | ☐ |
| Front trim, center short | 2 | 3/4" × 1 1/2" × 5 5/8" | 1x2, 8 ft | ☐ |
| Front trim, center sides | 2 | 3/4" × 1 1/2" × 22 3/8" | 1x2, 8 ft | ☐ |
| Back cleats | 2 | 1 1/2" × 3 1/2" × 18" | 2x4, 8 ft | ☐ |
| Back framing rails | 2 | 1 1/2" × 3 1/2" × 77" | 2x4, 8 ft | ☐ |
| Top boards | 2 | 1 1/2" × 5 1/2" × 77" | 2x6, 8 ft | ☐ |
| Door stiles | 8 | 3/4" × 3 1/2" × 22 1/4" | 1x4, 8 ft | ☐ |
| Door rails and center panel frames | 8 | 3/4" × 3 1/2" × 11" | 1x4, 8 ft | ☐ |
| Drawer box sides | 2 | 3/4" × 3 1/2" × 16 3/4" | 1x4, 8 ft | ☐ |
| Drawer box front/back | 6 | 3/4" × 3 1/2" × 15 1/2" | 1x4, 8 ft | ☐ |
| Baseboard, front Measure and cut to fit. | 2 | 3/4" × 3 1/2" × 33 3/4" | 1x4, 8 ft | ☐ |
| Baseboard, sides Measure and cut to fit. | 4 | 3/4" × 3 1/2" × 15 5/8" | 1x4, 8 ft | ☐ |
| Drawer faces Cut to fit each drawer opening. | 3 | 3/4" × 5 1/2" × 24" | 1x6, 6 ft | ☐ |
| Back panel | 1 | 1/4" × 32" × 77" | 1/4" plywood, full sheet (back panel) | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 2x4, 8 ft | 6 each | ☐ |
| 2x6, 8 ft | 2 each | ☐ |
| 1x4, 8 ft | 7 each | ☐ |
| 1x2, 8 ft | 2 each | ☐ |
| 1x6, 6 ft | 1 each | ☐ |
| 1/4" thick x 3-1/2" hobby stock, or 1/4" plywood or paneling (door centers) | 1 each | ☐ |
| 3/4" hardwood plywood, full sheet | 1 each | ☐ |
| 1/4" plywood, full sheet (back panel) | 1 each | ☐ |
| Base moulding, 4-1/4 in, 10 ft | 1 each | ☐ |
| Drawer slides, 15 in, pair | 3 set | ☐ |
| Pocket hole screws, 1-1/4" and 2-1/2" | 100 each | ☐ |
| Brad nails, 1-1/4" and 2" | 120 each | ☐ |
| Wood glue | 6 oz | ☐ |
| Primer and paint, or stain and poly | 1 set | ☐ |
| Drawer and door pulls | 5 each | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.