NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
A plywood corner base cabinet with an angled pie-cut front, sized to match standard 34-1/2" x 22-1/4" base cabinet dimensions so it can sit in a run alongside other modular base cabinets.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Larger back piece | 1 | 3/4" × 34 1/2" × 34 3/4" | 3/4" plywood, full sheet | ☐ |
| Smaller back piece | 1 | 3/4" × 34 1/2" × 34" | 3/4" plywood, full sheet | ☐ |
| Bottom shelf | 1 | 3/4" × 34" × 34" | 3/4" plywood, full sheet | ☐ |
| Sides Must match the depth of other base cabinets in the run. | 2 | 3/4" × 34 1/2" × 22 1/4" | 3/4" plywood, full sheet | ☐ |
| Top, with pie cut Cut from scrap; must start at least 34" x 20" before the pie cut. | 1 | 3/4" × 34" × 20" | 3/4" plywood, full sheet | ☐ |
| Base support, long | 1 | 3/4" × 34" × 5" | 3/4" plywood, full sheet | ☐ |
| Base support, short | 1 | 3/4" × 15" × 5" | 3/4" plywood, full sheet | ☐ |
| Face frame stiles Should match face frame stiles from other base cabinets in the run. | 2 | 3/4" × 1 1/2" × 27" | Hardwood 1x2, 10 ft total | ☐ |
| Face frame rails, wide | 2 | 3/4" × 1 1/2" × 13 1/2" | Hardwood 1x2, 10 ft total | ☐ |
| Face frame rails, narrow | 2 | 3/4" × 1 1/2" × 12 3/4" | Hardwood 1x2, 10 ft total | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| 3/4" plywood, full sheet | 2 each | ☐ |
| Hardwood 1x2, 10 ft total | 1 each | ☐ |
| Pocket hole screws, 1-1/4" | 60 each | ☐ |
| Wood glue | 4 oz | ☐ |
| Brad nails, 1-1/4" | 30 each | ☐ |
| Cabinet door | 1 each | ☐ |
| Concealed euro hinges, pair | 1 set | ☐ |
| Primer and paint, or stain and poly | 1 set | ☐ |
Overall cost: $$$. Lumber varies by region, species, and season, so we give a band rather than a figure.