NotchLoading plan…
Loading plan…
Use your browser's Print (Ctrl/Cmd + P) and choose Save as PDF. This page works offline once you've opened it with a signal.
An end table that's a dog kennel — four wall panels with 1x2 rail slats, built and finished FLAT, then assembled; corner brackets make it a flat-packing crate.
| Part | Qty | T × W × L | Material | ✓ |
|---|---|---|---|---|
| Rails Batch-cut with a stop block — 21 identical parts is jig territory. | 21 | 3/4" × 1 1/2" × 6" | 1x2 | ☐ |
| Side boards | 6 | 3/4" × 2 1/2" × 30 1/2" | 1x3 | ☐ |
| Side legs | 4 | 3/4" × 1 1/2" × 26 1/4" | 1x2 | ☐ |
| End legs | 4 | 3/4" × 2 1/2" × 26 1/4" | 1x3 | ☐ |
| Side panel plywood | 1 | 1/4" × 17 3/4" × 33 1/2" | 1/4" plywood | ☐ |
| End panel plywood | 1 | 1/4" × 17 3/4" × 21" | 1/4" plywood | ☐ |
| Door frame and back boards | 5 | 3/4" × 2 1/2" × 18" | 1x3 | ☐ |
| Door top and bottom | 2 | 3/4" × 2 1/2" × 17 1/2" | 1x3 | ☐ |
| Door sides | 2 | 3/4" × 1 1/2" × 15 3/4" | 1x2 | ☐ |
| Door rails | 3 | 3/4" × 1 1/2" × 15 3/4" | 1x2 | ☐ |
| Item | Qty | ✓ |
|---|---|---|
| Pine project panel, 24" x 36" The top. 3/4" plywood or MDF also works. | 1 each | ☐ |
| 1x3, 8 ft Side boards, legs, door frame. | 5 each | ☐ |
| 1x2, 8 ft The 21 rails and door parts. | 4 each | ☐ |
| Plywood, 1/4", 4x8 sheet Side panels; leftover makes the optional floor. | 1 each | ☐ |
| Hinges, pair | 1 each | ☐ |
| Latch Mounted where hands reach and paws don't. | 1 each | ☐ |
| Pocket hole screws, 1-1/4" | 100 each | ☐ |
| Brad nails, 3/4" | 60 each | ☐ |
| Wood glue | 4 oz | ☐ |
| Corner brackets The flat-pack option — walls screw together from inside instead of gluing. | 8 each | ☐ |
| Paint and wood filler | 1 qt | ☐ |
Overall cost: $$. Lumber varies by region, species, and season, so we give a band rather than a figure.